2 replies
by bcarlton0158 Accepted solution
by oh smeg Accepted solution
Would use whatever key Combination that the NB has to switch between the different Screens.
The reason why the External Monitor goes blank is that when the OS loads the Drivers for the Video Card get loaded and the Display defaults to whatever was the default Primary Monitor, generally the one that is part of the NB.
As you are no longer seeing anything at all you are gong to have to clear the BIOS so you'll need to grab the Users Manual to do this.
After you clear the BIOS as per the instructions in the manual you'll need to reset the BIOS again by adding the correct Date & Time and then set the system to run Performance Defaults. Remember to save the changes as you exit the BIOS and then when the OS gets tot he stage where the Video Drivers get loaded use what ever the key combination is to switch displays. This will also be in the Instruction manual.
if you no longer have the instruction manual you can download it from here
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending