Discussion Locked

Fatal Error in VSERVER.VXD when printing

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Our office has a 4 workstation peer-to-peer Win98SE network (ugh - I know). When printing to a shared printer (Canon BJC-4650) the computer woth the printer locally attached brings up a Fatal Error in VXD VSERVER (01) message - also causing the originating computer to freeze. I have updated printer drivers, changed the printer from one computer to another & reinstalled all network components (services & protocols) to no avail. Network stats: MS Client, NetBUEI, TCP/IP (static IP - for internet proxy), MS File & Printer sharing. Can anyone help me with this?

7 replies

by poettone

To troubleshoot problems printing to a network printer:
1. Verify that your printing issue is actually related to your network, and is not caused by a local printing issue. To do so, try printing to a local printer Note that if you can print to a local printer, your issue is probably network related. You may need to contact your system administrator for further
assistance with your printing issue.
2. Print to a file, and then copy the file to the print server: a. Click Start, point to Settings, and then click Printers. b. Right-click the printer you want to use, and then click Properties. c. Click the Details tab, and then click File in the Print To The Following Port box. d. Print a document from any program. When you are prompted, type a file name for the print job. e. Click Start, point to Programs, and then click MS-DOS Prompt. f. At the command prompt, type "copy /b" (without the quotation marks),
and then press ENTER, where is the location of the file you created in step D, is the name of the file you created in step D, and is the location of the printer on the network (for example, \servername\sharename).
NOTE: The /b switch denotes a binary file and causes the whole file to be printed. Without the /b switch, the whole file may not be printed. The printer may stop printing the file at the first CTRL+Z character it encounters in the file. 3. Capture a printer port for the network printer rather than using a universal naming convention (UNC) connection: a. Click Start, point to Settings, and then click Printers. b. Right-click the printer you want to use, and then click Properties. c.

by dsp

Very informative detailed answer - appears to have done the trick & given me some new ideas on how to set up our printing services (especially as much of our design lighting design & analysis software still runs from DOS) - top effort, thanks for the help

by poettone

Continued from last response:

Click the Details tab, and then click Capture Printer Port. d. Click the port you want to capture (such as LPT2) and the path to the network printer (such as \\server name\printer share name). NOTE: If you want this connection to be available each time you start your computer, click to select the Reconnect At Logon check box. 4. Try to print the document from another computer on the network. If you can print successfully from a different computer, your issue is specific to your local computer or with the program or document on your computer. You may need to perform the steps in the article listed in step 1. 5. If you still cannot print to the network printer, perform standard network troubleshooting steps:-Try to browse the print server. - Remove and reinstall your network protocols. 6. If you have multiple network clients installed, try removing one of the clients:
a. Right-click Network Neighborhood, and then click Properties. b. Click one of the network clients, and then click Remove. c. Click OK. d. Restart your computer, and try to print again. Good Luck

by jolly roger

According to the manufacturer's website there is no BJC-4650??? There is a BJC-4550 and there is a relatively new driver version 3.97 dates Aug. 25, 2000. If you're not using this driver, I would suggest you try it (assuming you really do have a BJC-4550). If you have a BJC-4650, I would contact Canon at http://consumer.usa.canon.com/index.shtml

Good luck!

by dsp

Tried Canon - they suggested downloading the latest drivers after I had informed them that I had already done so - & they do make a BJC 4650 - Im looking at it as I type this.

This discussion is closed to new replies.