Discussion Locked

Fdisked hardrive by mistake

0 helpful
33 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Having FDisked a customers hdd by mistake while adding a new drive how can i recover his one gig of drive space 3 comppressed hard drive and swap to the new partioned hard drive preferably free cos I dont have a lot of money thanks

33 replies

by dmiles

Thwe slightest possibility may be using the Norton's Disk Doctor Utility,that you can download from www.symantec.com
No gaurentee thet you will recover the data,but their are data recovery that are quite expensive.Good Luck

by bcross

Yeah there's no easy way to recover it. Ontrack offers data recovery, but it's QUITE expensive (it can range into the thousands) so if Disk doctor doesn't work, you might want to ask you're client where his backup of his data is (and act shocked if he doesn't have one) and explain to him how easy it is to loose data and try to work out a disaster recovery plan... I know how you feel. Been there done that. Screw-ups happen, don't let it get to you to bad, but learn a valuable lesson - when dealing with a clients, data, be very careful. Often, I'll unplug the HD's I'm not messing with to ensure they are safe. Also if there's critical data, a quick disk-copy or data-backup might be a good idea to preform. Good luck.

by clive(maddog)mills

thanks but I have the ontrack demos (that only let you recover 5 files) in fact i told my client and he was'nt bothered he said he had backed up every thing he needed

by bill cassada

When I used to do contract work I would make my clients sign a liability release stating they understood it was their responsibility, not mine, to have a backup in the event of a catastrophe. Without their signature on this form I would not attemptto work on their systems. I learned a painful lesson once when attempting to recover data from the ancient drive of an architect. His bearings had gone out, but when the data was not receoverable he blamed me and went so far as trying to take me to court over it. My lawyer and the drive manufacturer eventually convinced him it was not my fault, but I came TOO close to having to pay damages. Makes me queasy thinking about it....

by nalin_uduwawala

If after you fdisked it you have not tried anything else, try "lost and found " a product fronm the company who do "partition magic" it will cost you a few bucks but I am certain it will do the job for you.

I am not a salesman from that company!!!!.

It is good stuff.

by otl

Been there, done that. Went back into fdisk put setting back the way they were and all data magically reappeared. I had written down the initial perameters, whew!

GOOD LUCK!

by john deg

Try the following link:
http://www.ontrack.com/easyrecovery/

They have a few options available. As someone already mentioned, you can pay them to recover the data for you. You can also try their software and do it yourself. There is a free version available that will let you recover up to 5 files at a time. You can also pay for the software and recover all of the files at once.
I accidentally FDISKed my own hard drive, and this software saved my butt. Give it a try!

John

by mjchekal

I have had some success with the old Norton Disk Doctor for DOS finding and restoring Partions. I also have used a Mail-Order product Drive Wizard, but that was may years ago and I don't know if that company is still around. Hope that this helps, What I try to do every time I add a drive, is remove any drives I what to keep while doing the upgrade you can add them back to the chain at a later date.

by Member 35772270

What you are looking for is a program to recover the Master Boot Record MBR. There are several programs out there to do this with. go to WWW.Hotbot.com and search for partition recovery using the exact phrase, I got over 1400 hit. Be aware some of these programs require initial instalation before they will work, but you should be able to find one that will scan the disk and recover it.

by dkpalmer

Since it's a compressed volume, all you need to recover is the .cvf file - basically the ocmpressed disk image file. Restoring with F-Disk might work, but I'd error on th side of safety and download one of the free file recovery apps previously mentioned and use it to recover the compressed volume file. Then just put the recovered file on the new drive, mount it, and either use it or ( much preferred ), uncompress it onto the new drive.

by tim

Use a program called "Lost & Found" by Powerquest. Street price approx. $29.00. I have used it to recover data from a drive that was re-formatted.

by jlgarrison

If you know what the perameters where before you fdisk'd it you can simply re-fdisk it with the same perameters. This will revert the hard drive to it's previous condition. I have done this before. You also might ask your client if he has this info. Make sure you avoid writing to the hard drive until data is recovered. Once written to it will nearly impossible to recover unless you hire a professional.

by zzapp-pc

I recomend a program titled "hard drive mechanic." I have used it in the past on a hard drive that I fdisk'ed and formated. It seemed to recover all of the data. The proccess is a bit lengthy, but works. I recomend searching for the program on the net, someone is likely to to have it on their website, or you might try zdnet. it is also fairly cheap at local software retailers.

by clive(maddog)mills

thanks for all these quite usefull awnsers i did look at them a feww weeks ago and wrote a little thank you note to the most interesting but when I clicked to (submit) my browser promtly locked up and crashed and I was too busy too retype everything

This discussion is closed to new replies.