Discussion Locked

FLASH BIOS IN W2K PRO?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an ASUS P3V4X motherboard and I want to flash the bios.
How is this properly performed in W2K PRO?
Normal boot disks don't work, command,etc.
No one seems to have this answer.
Gracious thanks for your wisdom.
God bless,
Christopher

3 replies

by ins413

Best practice I have tried. Make sure that the BIOS is enabled to boot to floppy, and then insert Win98 boot disk (or DOS disk). Boot with no CD-Rom support, let it boot. After boot, remove boot disk, then insert floppy with flash. Type dir /p,this is to refresh floppy info. Then enter "command".exe "command to be replaced with executable" for flash file name. Then . BE AWARE! FLASHING A BIOS CAN BE VERY DESTRUCTIVE TO A SYSTEM. Make sure triple times that it is the correct flash for your system.

This discussion is closed to new replies.