Discussion Locked

Fonts very small

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
All fonts with Windows are very small almost to small to read. I have adjusted settings in the control panel with no success.

6 replies

by dklippert

Which Windows? (3.1,98,2000)?
Whats the screen setting (640x480,800x600, Etc)?
What fonts? (Title bar, Start menu, Word)?

by chill

This is on a Windows 98 System
Screen is at 800x600 16bit
The fonts for the text under each icon
is very small, also the text in every
window I open. It is also causing certain
windows I open to be cut off on the sides

by lizzy

Go to Start, Settings, Control Panel and open the display applet. Go to the Appearance tab and first try another scheme--down arrow to the bottom of the list and first try Windows standard large, then if there's no improvemnet, try the Windows standard extra large. If the windows you are opening are cut off on the sides, try exposing one side of the window by clicking on the title bar of it and dragging the window until you can see the edge. Move the cursor over the edge until the cursor changes to a double pointed arrow and click and drag in a direction that will make the window smaller. Then maximize the window and it should fit itself into the entire monitor picture. If the sides are cut off and the Window is maximized, you need to change your monitor settings--these are usually accessible on the front of the monitor--try resizing the picture so that you can see all of it--perhaps some black on all 4 sides. Another way to trouble shoot this is to try connecting a different monitorto it. Once you can see all of the picture, under the appearance tab of the display applet, you can increase many text settings so that they are larger. If none of this works, you may have a video adapter problem, but not seeing what you're seeing makes it difficult to diagnose definitively. Good luck.

This discussion is closed to new replies.