Question Locked

formating

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an old Sony Vaio (PCG-SR17K) with no cd-rom. The hard drive went bad and I need to install a new OS (Windows XP)on a new hard drive. Can I intall the OS on a hard drive using a hard drive enclosure? If so can someone explain the procedure. If not can someone suggest an alternative.

4 replies

by thechas

Here is what I used to do for all of my Windows Systems.

Install the drive as a secondary drive on another system, or in an external drive enclosure.

Partition and format the drive into a primary and an extended partition. The extended partition needs to be at least 1GB in size.

Create a logical drive in the extended partition.

Format the primary partition and make the drive a bootable volume.

Format the secondary partition.

Copy the Windows XP CD into a folder on the logical drive. Use a DOS format name for the folder like WINXP.

Move the drive back to the laptop.

Boot up. At the DOS prompt, navigate to the folder on the D: drive.
Run Setup.

Follow the prompts to install XP onto the C: drive.

You can also do this with an external CD drive, or by copying the XP CD onto a bootable external drive.

Chas

by santos_gonzalez

Thank you for your advise. I did everything except for makimg the primary bootable. I can use more advise.
Thanks

by thechas

For XP, there are a couple of ways to make a disk bootable.

Does the Sony have a working floppy drive?
If so, download the correct Floppy Boot Disk set from Microsoft. There are 6 different versions. While for just formatting it should not make a difference, the system files can make a difference.

Run the executable and create the floppy disk boot set (5 or 6 Disks).

With the hard drive in the Sony, boot from the floppy disk set. I think the floppies will take you far enough to format the drive and copy the system files.
If not, you will need to format the drive and boot from the floppies to get started, then point to the folder with the copy of the CD to install XP.

Or, from an XP system with the drive in the enclosure, there should be an option to make the drive a bootable volume when you run the format process from Disk Manager.

Chas

This discussion is closed to new replies.