Question Locked

Foxconn Motherboards and Sparkle GeForce AGP Cards

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a Foxconn mobo (661FX4MR-ES) info available at:

http://www.foxconnchannel.com/product/motherboard_detail.aspx?ID=en-us0000111

running Windows XP SP2. It refuses to detect my Sparkle GeForce 7600 GS AGP Card. Info available at:

http://www.sparkle.com.tw/News/news_7600GS_AGP/news_7600GS_pa_AGP_E.html

I have the latest mobo drivers and nVidia drivers.

At least the monitor knows that it is plugged into something - the message “Cable unplugged” disappears when the monitor is plugged into the AGP card whether the PC is on or off.

The Monitor will not show the POST screen nor the BIOS (Phoenix – updated 10-2005 which is the latest update for this BIOS) settings. It just sits there with the green light blinking. I have to plug it into the Integrated Graphics display.

I have tested the AGP slot by using two (older) AGP cards – 128MB and 64MB respectively.

I have also tested the Sparkle AGP Card on another PC – works fine.

The BIOS has no setting to disable the Integrated Graphics. It does allow you to select between AGP and PCI Slot.

The Specs on the Sparkle Card states that one needs an AGP 2 or AGP 3 slot but mentions no Voltage. The Specs on the Mobo states that it is indeed an AGP 2 slot - 1.5V only.

I am truly at a loss – any help will be appreciated.

Regards

Marcellus

11 replies

by hal 9000

But from the descriptions that you have provided it sounds as if there is a Chip Set Incompatibility between the M'Board Chip Set and the Video Card Chip Set.

This is something that is quite common with Non Intel Chip Set M'Boards. The Foxcom is a SIS Chip Set and the Video card has the NVidia GeForce 7600 GS Chip set which by the sounds of things will not work with that M'Board.

Now this is where things get nasty you can replace the Video Card with a different brand and the Same Chip Set and it will work on that M'Board or sometimes you need to go to a different Chip Set for the Video Card to get things to work. It all depends on how the maker has used the Chip Set on their Video Card and the M'Board maker has integrated the M'Board Chip Set.

Col

by mac

Thank you for your reply, HAL.

It gives some food for thought, although not good thoughts ):

It is a fairly new AGP Card on an old(er) board, but reading up on the AGP architecture, there should be no compatibility issues…in theory anyway.

The main difference between the three “versions” of AGP, namely 1, 2 and 3 is the signal voltage of 3.3V, 1.5V and 0.8 V respectively. The APG Cards are also slotted differently to prevent incompatible Cards being used…all theory BS, as this proves.

I have Googled this for three days now and I’m running around in circles…sigh

Keep Well

Marcellus

by hal 9000

I've put together brand new systems where the M'Board [b]Will Not[/b] support a Video Card from the same maker like lets say ABIT but the moment that I use a different Brand Video Card with the Same Chip Set the thing works perfectly.

Where your current problem is that because you are not working with new components you or anyone else doesn't know of Compatibility Issues between the different Chip Sets.

In a Perfect World you should just be able to plug in and it works and with Intel Chip Set M'Boards this has always happened in my previous experience it's just when you get involved with the different Chip Set M'Boards that you have problems as some of them don't follow the [b]Standard[/b] that was set out by the Chip Set Makers and they push some part to give better results at the expense of Compatibility in other areas.

If the Sparkle Video Card is new you should be able to exchange it for another brand that should works on that M"Board though I would probably be looking at an ATI Chip Set Video card unless you have an Overriding need for a NVidia Chip Set of some kind.

Col

by bcpgm

Test the video card on another system. If it is good, you got a bad MB.
If it is bad, well you got a bad video card.

by mac

Thanks for the reply bcpgm,

As I have stated in the post, I have tested the AGP Card on another Mobo and I have also tested two other AGP Cards on the Foxconn Mobo, both worked - that is why I am at a loss...

by mac

Thanks again for the reply, HAL.

Yes, you seem to hit the nail on the head.
I'm more of a Redeon man myself, but in this instance it was the clients call.

Thank you for your time and effort. I will exchange the card - just seems the logical thing to do.

Keep Well

Marcellus

by hal 9000

If I had a $1.00 for every time that I've run into problems with things like this I would have retired years ago. Actually come to think of it I did try to retire about 15 years ago but that only lasted 12 hours and then I had 10 staff and a list of clients that I couldn't say no to.

I should have stayed working for a Boss as it was easier work. :D

Col

by markyp1963z

I have the same problem with a radeon 9550 and a foxconn 760gxk8mc-s mb. motherboard won't recognise it, although I am using windows xp64 bit. Even if I install windows xp 32 bit it will not be recognised unless and this is weird, i install the radeon 9550 mobility inf then it gets recognised. Having emailed both AMD (ATI) and Foxconn on a number of occasions it seems that neither of them could give a stuff about resolving the issues involved with this conflict.

by hal 9000

Have you tried to disable the On Board Video Chip in BIOS as XP 64 has Known Issues with not supporting quite a few things and there just are not the supporting drivers available.

When it comes to Foxcomm I've never dealt with them so I can not even begin to suggest what they are like but judging by their product price I wouldn't be looking for a great Backup service.

AMD on the other hand is currently quite busy redesigning their Chip Sets for an AMD M'Board to rival Intel and I've never had any problems getting answers from them but I always ask the local suppliers first before I even attempt with the makers.

Although ATI & SIS have always in the past worked OK for me it's only been when I've run into things like the NVidia Chip Sets M'Boards where I've found a lot of problems but then again as I usually don't use anything but Intel Chip Set M'Boards I don't have a problem. but I do have a Clevo NB that has a SIS Chipset for a P4 and a 9500 Series Radon Video built in and it works without a problem. But then again it should as the makers picked the right Chip Sets to work together.

But as you can force the system to work with the ATI Video it sounds much more like a less than Ideal Chip Set Structure.

Col

by markyp1963z

yep totally disabled it, i have been to foxconn's website and it looks pretty muich like they prefer nvidia to ati anyway so we'll have to wait and see what response I get from either ati or foxconn

This discussion is closed to new replies.