Question Locked

Fresh installing XP on Dell XPS 710

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, this may sound odd, but I need to install my XP home edition on a Dell XPS 710.

The Dell comes with XP Media Edition 2005 pre-installed but it's the Japanese version, My XP Home is the English Version and that's why I want to switch them.

The XP I have is old, pre service pack 2 and I've done a little reading that this can cause difficulties with a SATA HDD (in the Dell).

What issues will I need to be aware of, and what steps should I take before attempting to do a clean install of XP?

I know the question is vague, but I would really appreciate any advice or links to advice, this is new territory for me1
Many thanks in advance.

Cheers.

5 replies

by hal 9000

Wipe the HDD with MCE on them with a wiping utility if you don't have one Boot & Nuke will do nicely and it's available here

http://tinyurl.com/4rfur

Then copy the SATA Drivers to the Root of a floppy and proceed with a clean install of XP but at the first blue Screen press the [b]F6[/b] key to install other drivers. When asked insert the floppy with the SATA Drivers on it and pres enter to continue. The Sata Drivers will be loaded and then you can finish the install.

As soon as this is finished install SP2 for XP and you should then be OK to update as required.

However you'll need the correct Licenses as you'll be unable to activate XP and if you are attempting this with a Recovery CD it's unlikely to have the necessary drivers on it so the systems are unlikely to actually work.

If you have an OEM Install CD you'll get the systems working but will most likely need to find Video & Sound Drivers at the very least.

Col

by ic-it

Go to the manufacturer's (system or motherboard) support site the drivers should be available.

by irishismyname

I've got an XPS 710 here that need a fresh install of XP Pro. I loaded the sata drivers (via f6), everything looks fine until the install gets to the "searhing for previous versions..." and it locks up. I've tried slip streaming the drivers using nlite, but that yielded the same result. What else do you have to do to this blasted thing to get the install going?

This discussion is closed to new replies.