6 replies
Initially I thought it may be the power supply... but after re-reading your post, it seems that the Power supply may be fine (fans on, lights). An amber light instead of green ususally indicates a "Stand-by" or power saving mode. Have you tried unplugging the machine, letting it sit, and then reconnecting the power cord to see if it will start?
Most power (and reset) switches on computers these days are momentary switches... meaning when pressed in they make contact (close the circuit) until they are released. So basically, the switch can either be shorted (closed all the time), or stuck on open (never closes the circuit). If you have a multitester, you can check for continuity of that switch by removing the leads from the motherboard (remember where they went), and connecting each probe of the VMM to each wire of the switch. Then by pressing (on) and releasing (off) the switch, you can determine if the switch is bad. If you have a bad switch, it's easy enough to buy a momentary switch from Radio Shack.
Good Luck
by rwesthdst
by mfortes
by thenewpl
by lisa.berger
Hey guys!
This is EXACTLY my situation now. What did the problem turn out to be? My guess is the power supply.
Lisa
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending