2 replies
by normh3
by hal 9000
While you're at it also check for trapped wiring on the power leads I've seen a few examples where someone has fitted a HDD or CD/DVD and trapped a wire between the drive and the chassis and shorted out that rail.
You could also try a Power Supply tester but this isn't really much use as you need to check the voltages as well I've seen a few PS that work with a PS Tester fitted but will only run a short time when connected to the computer.
Just as another thought pull off the front cover remove the reset switch and then see if it will start up I spent several hours on a rammed Reset Switch one day which nearly drove me nuts particularly as it was on a new case and it wasn't one of those cheap ones either.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending