Discussion Locked

Geting Moses' computer to work with mine

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Got an old IBM with 64K or ram. It was running a program for an optomoetrist that calculated lense withs. But now the HD is crashing. We need to get the data off and on to something else. The floppy drive doesnt work. The HD and the Floppy areunlike anyting that I have ever seen before. They dont have power connectors. I powered a floppy with my computer's power connector and then plugged the IDE cable into the other, but then the other wouldnt boot. I think that it sucked all the power out from it. I tried taking the old computers HD out and putting it in mine, but It wont fit on the IDE cable, its too wide. Any ideas??

9 replies

by >@ >@ gone fishing @< @<

The reason the IDE cable is too wide is becuase it is also used to POWER your drive.

Does the old drive BOOT to a Operating system of some description, if so, download a version of laplink and use the parralell port to transfer the data from this system to antoher working box. You could also use GHOST, it supports parralell trabsfer. With Laplink you will be able to select the COM ports if your Parrallel ports are in-compatible. I know the floppy drive on the other system is damaged,but laplink is smart enough to load itself onto the other computer over the parraell cable so you won't need to add the program to the hard drive manually, ie through the floppy. i would place VERY LITTLE LOAD on the failing drive untill you have a WORKING method of data transfer.

by yuval

Few things you can test if the lapkink answer does't work:
1> Try connecting external HDD (shuttle) to the parallel port. 2> if you have no other choice: print the data and use OCR to import it to text file.

by bill cassada

Temporarily replace your bad floppy with another floppy (VERY easy to do)...then hook up a Zip external parallel port drive to your machine. Get the Zip disk and run the program GUEST.EXE from the DOS prompt. This will let you run the Zip drive from DOS and transfer your files over. My bet is that you can fit your entire hard drive on one 100mb Zip disk. You can repeat the process to unload the files onto the better machine.

by mark.chiampi

Yep-- use a ZIP drive or use a program called "Laplink"-- it connects two computers via the printer ports by a cable.

This discussion is closed to new replies.