Discussion Locked

Gforce 2 Graphics

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am having some major problems with building my new system. I'm running a AMD Athlon 1.3Ghz with 1Gb SDRAM on a ASUS K7133 board. I installed my Chaintech Gforce2 MX 400 AGP card, ran the drivers and when I restart Win98 it reports the graphics arenot setup correctly and crashes to a cursor flashing in the top left corner. I've tried installing the latest drivers from both the manufactuer and Nvidia's sites. I then tried Win2000. Ran the CD driver install again and this time it worked and I configured my graphics fine, installed Creative Live 1024, was accepted, then my Modem. When I rebooted I got the same problem was with win98. I've removed the modem and drivers, I've even tried reformatting the machine and reinstalling the graphics but it still goes blank after running the loading windows2000 screen. Ok in safe and VGA enable mode. I'm getting really stuck now. I need some help. Can't work out how it works one minute and then nothing now. Please Help.....

9 replies

by montea7

Since some folks have had problems with a gig of ram I am going to suggest twoo things to try

1. Try the 12.90 drivers for the MX400 first
2. Remove 512 of ram

If removing 512mb ram helps then there are some bios settings to try that may resolve the problem.

by jaboy78

frankly speaking..win98 will not be stable is the ram is more than 512..try remove some of ur ram,,so make it below 512ram.

So download the cacheman 4.1 or above...its free software..this will fix ur problem..

by thechas

For "stable" operation of Windows 98 you need to have 511MB of RAM or less. It is just a bug in the program.

Secondly, are you installing the chipset drivers, in particular the AGP miniport driver and directX before installing the video driver?
You need to install the drivers in the proper sequence to have everything work.

Also, check for IRQ conflicts. This could be part of the problem.

Finally, check with both chaintech and ASUS for bios updates. Many times, device conflicts are discoved and corrected by code changes in the video or system BIOS.

by damjef

youv'e definately got software/firmware probs! its a known fact that 98 can be very tempermental with large amounts of ram, win 2000 on the other hand loves it, as for the modem thats definately a driver fault and if you check you will find some ofthe files hidden away, best way to check is to browse the source of the files make a note and delete them one by one in safe mode.a long and tedious task but thorough(it's not got a pctel chip on it by any chance? cos they can be a nightmare with 2000)boot with conformation and look for a dodgy .vxd file related to your product and choose 'N' when asked to load. hope this helps

This discussion is closed to new replies.