3 replies
by 2392simsjr Accepted solution
by meridenscrafts Accepted solution
by thechas Accepted solution
When you say it does not detect the drive, do you mean at the BIOS or Windows level?
Unless the BIOS was hard set to your old hard drive, it should auto-detect the new drive. If the new drive is the only drive, you will get an error message about no operating system found, insert disk.
In order to use the new hard drive, you need to partition, format, and install an operating system on the drive.
Now, if you are adding this as a second hard drive, all you need to do is go to the Disk Management option of the Computer Management option under Windows Administrative Tools.
(Assumes XP)
There you can partition and format the drive.
For either of the above, if the BIOS does not detect the drive there could be other issues. Start by making sure that the specific IDE channel is set to auto-detect. Then, check cables and jumper settings on the drives. With 2 drives on one cable, one needs to be set as Master With Slave, the other as Slave.
Chas
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending