Hardware

Ask something
Discussion Locked

Hardware problems

0 helpful
3 replies

by bulo_mei

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
No beep sound still. I have replaced the SMPS and the RAM also but still there is no sign of booting. I am using a 845 GL Gigabyte mother board. The motherboard still receives current and when i turn on, the cpu fan runs too but the normal post beep sound doesnt appear and no other beep sonuds appear. There is no display in the monitor even though the monitor is workin fine.

3 replies

by stress junkie

I had a Gigabyte motherboard a while back. I never got it to work. I finally just bought an Epox. I will never buy another Gibabyte product.

by slau70

i have same problem too.but Try to reset the bios using the bios reset jumper form the motherboard.if don't workind try the same after you unplug and plug the video card and other card or ram stick you have.Try too a big power source like 400w if yours is not storng one.Reviev the bios seting.

by goyal_253

This is only the prboblem with the CMOS battery.You just replace the CMOS battry and your problem with be surly shortout.
rgds,
goyal

This discussion is closed to new replies.