Discussion Locked

Hardware profiles

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just installed a new image on an IBM t21 laptop.
I had to create two hardware profiles to match the old computer. now when a profile is selected I get a Bluescreen which says " WINDOWS IS UNABLE TO DETECT YOUR HARDWARE CONFIGURATION" it promts meto verify which hardware configuration I am using and then it works fine. haow can I remove the blue screen and what causes this?

7 replies

by dmiles

Open the Control double-click the System icon,select the Device Manager Tab and find the device in the list,click the plus and in the sub-list if the device is listed twice,highlight the old device and then click the remove button and reboot the machine.

by shanghai sam

It is standard when you use hardware profiles to have to choose which profile the computer should use to boot up. If you created the profiles to make the image but don't need two profiles then just delete one and the message should go away. If you need them both for some reason, then boot up and choose the appropriate profile for the current configuration, then delete the one that is not in use. Reboot and see if it works without errors. If so re-create the second one and try it again. To remove a hardware profile Start-->Settings-->Control panel-->System. Pick the Hardware Profile tab. Select the one you want to delete and click delete.
Hope this helps.

by pcjockey2000

It is standard when you use hardware profiles to have to choose which profile the computer should use to boot up. If you created the profiles to make the image but don't need two profiles then just delete one and the message should go away. If you need them both for some reason, then boot up and choose the appropriate profile for the current configuration, then delete the one that is not in use. Reboot and see if it works without errors. If so re-create the second one and try it again. To remove a hardware profile Start-->Settings-->Control panel-->System. Pick the Hardware Profile tab. Select the one you want to delete and click delete.
Hope this helps.

by pcjockey2000

For some reason the system hiccupped when I submitted my answer. I don't know who "Transient" is but the response under that name is a duplicate of mine.

PCJockey2000

This discussion is closed to new replies.