Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a hardware ide raid controller. It supports raid 0 and 1. If I set up the raid for mirroring can I then install win 2k professional and use the hardware raid mirroring even though win 2k dose not support mirroring.. thanks
7 replies
by ins413
You're comparing apples to oranges. It is true that W2K Pro does not support a software RAID level 1. But that only refers to software raid 1. Hardware RAID levels are a totally,(but better) different animals. Hardware takes away the power from the OS and gives it to the hardware itself at a lower level. AS long as you have a hardware RAID level, you can RAID 1 (or RAID 5) with any OS. That's the glory of having a Hardware Raid controller. Hope this explains???
by matt5968
The question was auto-closed by TechRepublic
by jimbb
Just to add to this: A RAID controller shows "a disk" to the Operating System. How that disk is combined of seperate small disks, how the fault tolerance is done (or not) is really no concern of the OS. The RAID controller handles that completely.
The OS (any OS) just sees a disk, and uses it as if it was a single disk.
Jim
by matt5968
The question was auto-closed by TechRepublic
by adeal
What you are asking works perfectly fine. I have the same setup on a home machine. There is one Microsoft article you might be interested in reading, referring to what happens when a drive fails and the mirror is "broken". It is knowledgebase article Q249321.
by matt5968
The question was auto-closed by TechRepublic
by matt5968
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
2 helpful
25 replies
Discussion
Do you think that business directories are relevant to Local SEO And Lead Generation today
0 helpful
16 replies
0 helpful
6 replies
0 helpful
12 replies
1 helpful
9 replies