The real correct way, of doing an hardware upgrade while maintaning the windows installation, is to previously remove the drivers that match the hardware you are replacing.
If you haven't done so, windows is going to try to use the same drivers for a different hardware, and that obviously doesn't bring good results.
Have you removed the drivers before replacing the hardware? No?
Well, try to boot Windows in "Directory Services Restore Mode (Windows domain controllers only)" and once there, login with your administrator account, install the drivers that match the new hardware, if installers do not work, try to use the "device manager" inside the "computer management console", after installing the new drivers, reboot the computer, and windows should be able to boot normally again, with no problems at all.
If you don't have that option available at the Windows boot, the only solution I remember at the moment, is for you to replace the hardware back to the old hardware, and do thing correctly has I mentioned at the begginning of this reply.
I hope this helps you.
PS- If you don't know how to reach the Windows boot menu, press the F8 key right at the moment your computer starts to boot Windows.