Question Locked

Harware

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a fairly new emachine. When I try to turn it on nothing happens. The light on the motherboard doesn't even come on. I took a power supply out of my other emachine and tried that. The light on the motherboard comes on but nothing else happens. The cpu fan doesn't come on either. Help ASAP

6 replies

by hal 9000

Return it to the maker to be repaired. From your description it sounds like a M'Board Problem and you do not want to pay for a replacement M'Board if the maker is responsible for it.

Col

by mr.wiz

messed that up when he opened the case. Hopefully he'll be able to get them to work on it.

by mgissom

Problem with a customers emachine. It was and AMD 64 939. It ended up being the motherboard. If it is a Foxconn board trash it and get another. You can get one from Newegg or Tiger for 60 bucks dependign on chip socket.

by rbuntyn

You could have a power supply that cannot support the amount of power needed to run the system. If this is not the case, then it must be the motherboard.

by animatech

It sounds like a motherboard but just to make things a bit clear.
Did you buy the machine as a whole unit or did you build it yourself?
Was it working before or it never worked?
If you bought it as a whole unit then you might as well use your warranty and get it back to the shop you bought it from.
If you have build the machine ourself then you will need to check a few things.
Does the power supply work on the old PC?
It is worth a while going through your cable connection again.
Maybe try to replace the motherboard or get it check at the place you got it from.
As for PSU most PSU even generic ones that comes with some cases should support most new systems.

This discussion is closed to new replies.