Discussion Locked

have cam access by other workstations

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to setup a usb cam at our front desk and broadcast to a few user workstations.

I have heard of www.teveo.com that allows you to do just that, but I'm concerned about bandwidth as it will stream it.

I was wondering if I can set a static ip to the workstation with the cam and simply give the users the ip address and port for the module that will stream it to them. (I'm sure it's not that easy, but it's worth a shot)

Thanks.

5 replies

by mphoffar

I don't think you can just tap into a port and address another peice of hardware like that. You will need some sort of software to control the broadcast from the cam.

Some things that'll probobly work for you

Just setup a local machine and use the software that comes with it, leave it up and PC anywhere into the machine to view it. ONly problem is, only one person can use it at a time

CU-Seeme has a small server app that can allow a few people to pull a broadcast out of it

You cansetup an ILS (or ULS) with exchange server and use netmeeting to tap into it. If I'm remembering correctly this is just an option you can install with the exchange installation

as ar as bandwidth goes, you can control that on the PC with the Cam, you would just adjust how many frames per second the cam will crank out.

Hope this helps you

Mark

by mishratron

since your users do not need continues use
why not make a small workstation , attach the camera directly and install vnc
do a web search for that
follow there instrucations for use , and it will give your users a low bandwidth(comparitvly)way to access that workstation
by putting the other workstation on there desktop in a window
check it out dude, it is cool
mishratron@hotmail.com

This discussion is closed to new replies.