Question Locked

Help moving a large file

0 helpful
37 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need a little help. I have a 6 gig movie file on my PC hard drive and I want to copy it over to my external HD. Problem is when I try and copy it I get an error stating that the destination drive is full. It isn't even close. I have to assume it has something to do with the small amount of memory on the computer (390Mb).

Is there some kind of utility I can use or something? I am getting rid of this computer and need to get my files off of it before I can do that.

Thanks

37 replies

by older mycroft

So if you're transferring to FAT32 you are out of luck.

If the transition only involves NTFS, I'd suggest you defrag the recipient drive, since there may not be 6+GB of contiguous space available.

by jiminpa

Is it possible to take an external hard drive and format it NTFS? Is there any reason I shouldn't do that? other than the nuisance factor of copying everything off the drive to another location then copying it back...

by older mycroft

If this external hard drive is FAT32, is working well, is not causing (other) problems - I'd leave well alone.

Too much bother to move stuff off it, to reformat to NTFS, just to put everything back on. [i]You can even change from FAT32 to NTFS in situ without moving the files - [b]but at your own risk![/b][/i]

Really depends what size the partitions on the external drive are: anything around the 35/37GB mark I'd leave as FAT32. :)

by hal 9000

No it's perfectly OK to format as NTFS if this isn't a general Purpose External Drive that is used as a Tool.

If it is and you convert to NTFS which prevents the need to actually format again and copy the data off and back to it when you plug it into any system that doesn't read NTFS it's not usable. All distributions read FAT 32 and that is why the External Drive Makers sell their premade drives formatted to this standard.

It;s been a while since I've used a MAC and I'm not sure if they will read NTFS Partitions as all of my external Drives that I carry with me are formatted to FAT32. Some of the older Red Hat Installations used by ISP's don't read the NTFS Partitions that's why I only carry FAT32 External Drives.

OH and open the Run Box and type in [b]convert drive_letter: /fs:ntfs[/b] to convert the external drive to NTFS. I would really suggest backing up before proceeding though. ;)

Col

by ricky14685

Hi Jimmy,

You can reformat ur external Hard disk as NTFS format...by connecting to any vista OS system..Vista provide default feature to format your HDD with NTFS format...then u can easily transfer ur 6GB file to this new HDD.

Regards,

Gurpinder Singh

by mtsalfi

Your external drive must be FAT or FAT32, just convert (format) it on NTFS file system. There won't be other issue or solution whatsoever.

by adeel289

Hi, Please check the External drive property and then Format it to "NTFS" if it is on "FAT" or "FAT32". Hopefully it will solve the problem.

First take the backup of your external drive then proceed further.

Thanks

by Former member

Use the convert command to change the destination drive to NTFS from a command prompt

by jiminpa

It does seem like an awful lot of work just to move one file. I'll give WinRAR a try and see how it goes.

Thank you sir, you are a gentleman and a scholar.

by ccrabtree

May be a lot of work, but consider if you want to back up a large amount of other >4gb files in the future? Be best to do it now than later. Also, to reformat in windows, you'll have to change the settings from "optimize for quick removal" to the other setting before you can format it.

by older mycroft

[i].. You meant to do that, now did you?[/i] :D

[b]999[/b] would be the antipodean of [i]what once was, never to be seen again.[/i] ;)

by oh smeg

TR did it to me again. The system rebooted after answering a question and when it came back on somehow I was logged in as HAL. :(

JJ was certainly quick off the mark though as when I got back to change things it had a thumb applied. Me thinks it was a conspiracy to do this. :D

I've been debating if I should edit the above to nothing and repost in the correct account. :0

The latest TR Swag has just arrived and my comment was that Sonja couldn't have fitted a Tamminkins and all her propriety in that Envelope. But I have a Nice TR Lanyard to go with my 32 GIG Corsair Thumb Drive that didn't come with one. Looks so much batter than the M$ Vista and Office 2007 one that I was using too. :^0

Col

by older mycroft

When I put in my Swag Order.

I knew there was something I'd missed - ah well. :(

by jiminpa

I figure since you lost your coveted 666 it was no longer a concern. I would be happy to withdraw the thumb. I was merely showing my appreciation for your response.

by shalomc_z

Recently I had a similar problem - copying a 6 Gb file to an 8 Gb disk-on-key. When I saw that the partially copied file was 4 Gb I immediately understood the problem and reformatted the disk-on-key to ext3. Since both computers ran Linux, this wasn't a problem.

However, when I still used Windows on my work computer, I used to use http://www.fs-driver.org/ for accessing various ext2/3 external drives. Although this doesn't totally support ext3 - it's good enough to do the job.

This was also before the user-space NTFS drivers for Linux became available - so ext2 was really more portable.

It's a pity all those PDA's, cameras and phones have standardized on FAT32, it's understandable for small media, but these days we're staring to see 8 Gb memory cards, and the 16 Gb are just around the corner.

by older mycroft

I've got two 16GB flash drives.

I'm not too motivated to reformat though - still too many machines needing some of what is in my toolkit, that can't read NTFS drives. ;)

by oh smeg

Not only are the 2 new Corsair 32 GIG Thumb Drives not going to be altered to something slightly more useful than FAT 32 none of the HDD that I have in External Encloses will be changed it's just way too convenient in the Tool Box. Even the 128 MEG Old Thumb Drive can stay the way it is. No getting around just how useful Plug & Play actually is.

If you need to load changes on any computers that I work on it's just not a option with some customers and too time consuming with the rest.

My time is Pensive so I've been told and they don't want me wasting any.

I can't afford to waste any either as I have way tooooo much work as well. :(

Col

by ricky14685

Other easy way...is

Just connect ur Hard disk to any Vista OS..as told by me in previous answer and right click on the Hard disk and format it with NTFS...

Ricky....

by rob miners

You could add the Drive as a Slave to your PC or a USB enclosure and then copy it off along with anything else that you may need.

Another alternative is a Network connection.

< Oops >

Does it have to be copied to this Drive?

by brucelparsons

I had the same problem and resolved it by converting the external drive to NTFS.

The suggestion that putting it in a USB enclosure or making it a slave to your PC will still not work unless it is NTFS. I had to convert an internal drive to NTFS to be able to handle the large file I was dealing with.

The suggestion that you need to ues a VISTA system to accompolish the conversion from FAT to NTFS is not correct. XP will do this for you. That is how I did mine.

by picker

new drives are 'cheap like borscht'.

Just buy an empty drive enclosure (USB2.0) and pick up a new 500 IDE for around a $100 and format it to NTFS.

What could be simpler than that? You've already wasted enough time to cost $$ double that in manhours the time it has taken for this thread to develop.

by rob miners

I just did a quick test with a 10GB drive that already had information on it and everything is working OK.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Administrator>convert G: /fs:ntfs
The type of the file system is FAT32.
Enter current volume label for drive G: data
Convert cannot run because the volume is in use by another process.
Convert may run if this volume is dismounted first.
ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.
Would you like to force a dismount on this volume? (Y/N) y
Volume dismounted. All opened handles to this volume are now invalid.
Volume DATA created 26/11/2008 7:21 AM
Volume Serial Number is D818-F669
Windows is verifying files and folders...
File and folder verification is complete.
Windows has checked the file system and found no problems.
9,950,528 KB total disk space.
1,024 KB in 90 hidden files.
344 KB in 43 folders.
1,111,144 KB in 365 files.
8,838,008 KB are available.

8,192 bytes in each allocation unit.
1,243,816 total allocation units on disk.
1,104,751 allocation units available on disk.

Determining disk space required for file system conversion...
Total disk space: 9960268 KB
Free space on volume: 8838008 KB
Space required for conversion: 62934 KB
Converting file system
Conversion complete

C:\Documents and Settings\Administrator>

< mind you it will depend on the operating system on the the PC with the 6GB file. If it isn't an NT PC you are out of luck. >

by rob miners

was remove the Drive from the PC that has the 6GB file and slave it to a PC that is using NTFS.

by older mycroft

However, at the other soup-canteen...

WinRAR is FREE, personal leisure time is eh.. FREE, TR Peers-time is FREE, Total cost, including (self) service charge - FREE.

If you can 'read between the lines' of this allegedly expensive thread, you might notice that the problem was ratified in 14 (fourteen) minutes. All the rest is perhaps expensive Borscht with Sour Cream. ;)

Plus, you don't end up with [b]Borscht for Brains.[/b] :D

by jiminpa

That is what I am attempting to copy the file too.

by older mycroft

The sudden appearances of a newly outlandish HAL9000, and the slightest hint of [b]OH Sm[u]u[/u]g[/b] as well. ;)

Anyway, HAL cannot be reborn by one Thumb alone. :D

by oh smeg

But it did give some people a Aim in Life trying to get rid of the 666.
^0

Actually the system failed dramatically here this work station fell over the system rebooted and came back with the HALL Account then when I went to edit it out and repost it fell over again. When I finally got back in you had marked it. Quick that's all. :D

Col ]:)

by older mycroft

Since you're moving the file because you're getting rid of the host computer - why not just burn it to DVD ?

Fire up NERO x.x, leave it churning away overnight and you can condense the file onto a single layer DVD.

That way, you've copied it, it's solved the file size problem, it's no longer magnetic so it's more stable. :)

by heavener

... but I experience this ALL the time.

The computer is running XP Pro. It's an older model with a Pentium III -- Centrino, of course (i.e. only supports USB 1.0). Both the internal and external drives are NTFS. The external drive is 90GB, the internal is 300GB.

I get a "delayed write" error if I try to transfer a file larger than 1GB and it always terminates the transfer.

Here's my take: I don't think the BIOS was designed to support big external drives across USB.

BTW, I can't use my 4GB or 16BG thumbdrives on that computer, either (only the 512KB). I think for the same reason.

My workaround is to use Network Magic -- connect the external drive to my laptop and transfer the file across ethernet (pretty slow but it works). But that might not be an option if you have only the one computer.

by brendanbret

I would suggest you to clear your hard disk for storing your data or let you know weather your hard disk is supporting that much of memory. Try to compress your data with different softwares available.
Hope this will solve your problem.

lanyard

This discussion is closed to new replies.