8 replies
by twobrats64 Accepted solution
by sgt_shultz Accepted solution
I have also had this problem when RAM was misinstalled or not quite seated so i'd try reseating all stuff that'll let you, in particular the processor, the ram and the BIOS. use static precautions, naturally. and inspect for physical damage such as bent pins. did you try reflashing the bios.
just 2 cents to give you some ideas until the hardware gurus hear can respond 'dead pc' is good search term to use on the mfg website's support section
by pierrejamme Accepted solution
Twobrats;
You might also have a processor seating problem. do you get anything on the screen at all?
Is the video card the correct voltage for your mobo?
Like Sarg said, Charles will be along soon.
by tonythetiger Accepted solution
by thechas Accepted solution
Check the position of the CMOS reset jumper.
Many motherboards ship with the CMOS reset jumper set to the reset position.
Also make sure that you have the Auxiliary power connector plugged in.
Chas
by twobrats64 Accepted solution
Thanks all for your advice. I had already tried clearing the CMOS with the jumpers, and also starting with only one of each memory stick at a time. I also confirmed the output of the power supply.
Any other thoughts?
by tonythetiger Accepted solution
by rlambertsc Accepted solution
This happened to me once. Turned out to be broken wire. It took forever to trace. Hopefully your problem will be much simpler.
- Ralph
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending