Discussion Locked

Help !! Report prints differently

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to print a report that will print fine on one computer with a HP Deskjet 952c but forces a second page with header and footer on a different computer with different printer. (HP Deskjet 870se or a dot matrix - Panasonic KXP 2130).

I know that settings must be the problem, but where do I go. I have checked every setting I know to check on printer and computer. Any ideas? I really need this to work.

7 replies

by johnm

Since the second computer forces a header and footer, that is probably a printing setting in the application on the second computer. What application is creating the report (word processing, spreadsheet, download from mainframe)? That apps settings are the probable cause. To pin it down for sure, you could move the DeskJet 870se to the first computer, load the printer drivers, and print the report. If it prints correctly from the first computer, the problem is in the second computer's settings.

by cdobbin

Are you logging into a network, if so there it is possible that the network config is set to print a banner page. If you are on a novell network using the Novell client32, right click on the red N in the system tray and goto properties, then click default capture and make sure "print banner" is not checked.
If your not on a network and the printer you are trying to print to is local try reinstalling it again, if that fails try to copy a file in dos to the printer(ie: copy autoexec.bat >lpt1:) if this prints without the banner and reinstalling the printer does not help then I would say it is a setting in the application you are trying to print from.
Hope this helps.

by mservino

I ran into something similar to this once. The issue was with the fonts in my case, and cause blank lines to run onto a second page. Keep in mind that a different printers may know the same font to be two different things. And if an application inteprets a new page being produced it will force headers and footers on it. My suggestion to you is to look and see what your font settings are on both machines and see what your default fonts are on the printer. This could be the source of your headache, took me 2 days to figure it out, when I had the problem.

Hope this helps,
-Mike

by kermit

I believe this is a possibility because I have determined that different combinations on workstations and printers will print from this app which is on the network (Novell 5.0) but all printers are local. Have any further ideas on how to check fonts??

This discussion is closed to new replies.