Question Locked

help with usb booting on an IBM Pro300A_AFP motherboard?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi i want to boot off of a flash drive without a hard drive, (laptop hdd's and adapters are expensive) but with a usb flash drive. i have a 128mb flash drive from staples, and i followed the instructins on pendrivelinux.com and installed puppy linux on it. the problem is, that it wont boot on my IBM pro300a_AFP 3.1 motherboard. i cant install a regular hard drive due to space issues, so i figured i could boot from a usb thumb drive. i have the bios set for usb device boot, but it isn't recognized in the area for the usb device in the bios. i was wondering if anyone could help me figure out what it is i'm doing wrong? is it the flash drive? is it the motherboard? both? software? bios revision? can someone please help me get this working?

PS: it has a pentium 3 processor,(i am trying to update the bios so i can install a celeron) 256mb of ram, and a 300w power supply. if you want to see the computer itself, go here: http://www.instructables.com/community/my-smallest-computer-build-HELP-WANTED/ (read the updates, not the original post)

5 replies

by tintoman

But I would be very surprised if a mobo of that age and spec could boot from a memory stick.
Although you could look for a bios update that supports it I reckon you are flogging a dead horse my friend

by mba1jp

If you didn't try already, Format the stick FAT 12 or 16 on the oldest MS OS you have access to. Don't forget the /s.

by zack247

how am i to do this? can you explain in a ltlle more detail? my oldest microsoft os is 98. what /s?

by mba1jp

I was thinking that the problem might be the file system or the Master Boot Record of the USB drive. If you can get the drive formatted with MBR and file system at least as old as the board you might get this to work. Right click on the drive under My Computer with the oldest OS that recognises the USB drive, select Format,select FAT16 (or FAT) and select include system files if that option is available. Good luck.

This discussion is closed to new replies.