26 replies
by jmcentee Accepted solution
by frankotech Accepted solution
Speaking from experince, Ive run alot in to Emachines and Gateways, both always with PSU and MOBO problems
If your hardware works fine on other machines, test you PSU aswell, narrowing it down to MOBO
FrankoTech
gonzalezfranciscoalberto@hotmail.com
add me to msn messenger
by jmcentee Accepted solution
by charvell Accepted solution
is actually usually a replacement. You may be able to get it done under warranty from Gateway if your machine is under warranty.
Is your keyboard PS/2 or USB? One thing to try would be using a different keyboard that uses a different port. So, if you are using a PS/2 keyboard, try a USB one or Vice Versa. It could be that the mobo is ok, but that port has gone bad. (Additionally, if you are already using a USB keyboard, try a different USB port).
by seanferd Accepted solution
look for local computer repair shops which can fix PCBs. You can have a look yourself, as one of the most common board failures are capacitors going bad. If the caps are bulging, or if one is leaking something, or looks burned, a capacitor replacement would fix the problem (hopefully).
Make sure you get a decent PSU with enough power, since you are trying that first.
by jmcentee Accepted solution
by oh smeg Accepted solution
If you unplug the mains and press the ON Button for about 10 seconds it will discharge the Internal Capacitors and if it starts then the Filter Capacitors in the Power Supply have gone off. You need to replace the Power Supply if that is the case here and I would suggest a Good One instead of what Gateway supply.
Something like a Antec
http://www.antec.com/Believe_it/product.php?Series=MjQ=
Corsair
http://www.corsair.com/products/power_supplies.aspx
Gigabyte
http://www.gigabyte.com.tw/Products/PowerSupply/Default.aspx
Would be the way to go here.
Col
by seanferd Accepted solution
He knows what he's talking about, and it does sound more like a PSU issue that way.
I was hoping OH Smeg would post as he always has a list of the good PSU vendors. :D
by santeewelding Accepted solution
by jmcentee Accepted solution
by oh smeg Accepted solution
The Little Tin Can Type things standing on their ends around the CPU generally with a Blue of Brown Covering would have to be my starting point.
This is a Capacitance Issue or more properly a Lack of Capacitance. By your description in 999 out of 1000 it is the Power Supply and very occasionally it is the Electrolytic Capacitors on the M'Board.
Just out of curiosity here have you checked the Mains Outlet [i]wall outlet[/i] for the correct voltage?
Col
by jmcentee Accepted solution
by ron k. Accepted solution
In Safe Mode go to Start|Run and type in msconfig
Go to the Startup tab and disable every item with the button. Reboot, see what happens.
If it boots you'll then be faced with the task of running msconfig several times, enabling 5 items at a time until it won't boot again. Then you'll have to eliminate one of those 5 items, one at a time.
If disabling all of the items in the Startup tab doesn't work, simply run msconfig again and enable all items.
by oh smeg Accepted solution
But you need to visually inspect the Electrolytic Capacitors on the M'Board. These are small Components that look like Tin Cans standing on their ends. They generally either have a Blue or Brown Covering over the sides of them and you need to look for Bulging, They should be flat across the tops, Leaking, pretty straight forward there should be no stains on the M'Board around them and finally the Capacitors actually breaking apart, you can gently wriggle them one at a time and see if the legs are still part of the Capacitors. If they show any signs of failure like Bulging, Leaking or Disintegration the entire set of Electrolytic Capacitors need replacing by someone with Specialized Electronic Experience or you can always replace the M'Board. They are generally around the CPU but there may be other smaller ones located in other places on the M'Board.
Just from my past experience Intel CPU's tend to survive situations like this where as AMD CPU's don't. ;)
Col
by seanferd Accepted solution
to fully power your system, then we, I believe, are back to damaged capacitors on the system board.
You can try to look for them yourself, as describe twice in this thread, or just take the board to a repair shop (you will have to do this to have any bad caps replaced anyway).
by agsapt Accepted solution
by jmcentee Accepted solution
by oh smeg Accepted solution
Mechanical Pick & Place devices in all likelihood the capacitor in question was probably fitted like that. These things are assembled by machines and then passes onto the Wave Soldering Machine to solder these things in place so provided that the Capacitor is soldered tot he M'Board it doesn't matter how it is sitting on the board.
The last possibility here is to remove the RAM and CPU and refit. Quite often it is possible that the Contacts for these things get dirty and removing and refitting cleans the contacts. As the unit is not producing any lights on occasion I would be looking at the CPU as a possible culprit here but you have to be extremely careful with these so you do not bend Legs of the CPU's or cook them by not replacing the Thermal Paste between the CPU casing and the Heatsink that keeps it cool.
Col
by santeewelding Accepted solution
I have mused about one these machines reworked into a sexual torture device. Spread-eagled, you would be stripped of pudenda with successive waves of ~800F liquid.
Sorry. I read all sorts of things into what you say no matter how tightly you bolt down your subject.
by peconet tietokoneet Accepted solution
The motherboard may not be fitted properly on the standoffs. So you will have to take out the motherboard. You will need to get some new spacers to separate the motherboard (you can get the spacers form any good computer store/shop). Replace the old spacers with the new ones and then put back your motherboard. Another thing, it could be your processor, so you will have to take it out and give it a good clean and then replace with some thermal paste of which you should apply very, very thinly.
Write down where everything goes and you should be fine.
>>>MOST IMPORTANT<<<
Make sure that you ground yourself with a static wrist strap of which you can buy from any good computer shop or store.
Hope all goes well.
by boxfiddler Hot topic Accepted solution
by seanferd Accepted solution
by oh smeg Accepted solution
You are a wicked little boy who need their mouth washed out with a nasty solution of something.
While it's maybe OK to think things like that in some perverted sort of way it's defiantly not OK to talk about them. I now have a image in my head of some S&M Santee being held down as the Pick & Place machines populate him with Electronic Components and then he gets sent to the Soldering machine to have them properly attached. :-&
I defiantly do not feel well now. But I should add that these Wave Soldering Machines are set to 310C not 800F as they are soldering Electronic Components that may be heat sensitive. :p
I'm not way to scared to mention Ultraviolet Soldering Stations for the Surface Mount Components. :^0
Col 0:-)
by santeewelding Accepted solution
I hadn't thought of soldering components to the human motherboard.
Just think: once your ass -- so to speak -- is connected to the internet, all manner of remote perversity becomes imaginable.
You're worse than I am worse.
by boxfiddler Hot topic Accepted solution
by ron k. Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending