Discussion Locked

high availability routing

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two leased ccts from two ISPs,and two proxy servers for each link running microsoft proxy.Is there a way that I can dynamically route ip traffic through each link when one link fails.The request and reply should come through the same cct at that time.

5 replies

by jerrym mcse+i / a+

Hi,
Install RRAS (routing and remote access server) on both machines, assign different metrics for the different routes, if one route isn't available the other route will automatically be used, this works for dedicated or demand dial interfaces as well...after install rras look under program files\routing\doc for all you want to know about this powerful and free tool!..
Thankyou for the post! jer

by espen

If both routers to the two ISP's are cisco's,
you can set up failover between them. If
you run address translation on both, and
use the cisco protocol set for failover, the
transition between the two should be
pretty smooth. On the proxy, configure two
default gateways. You can do this with the
route -p add command

Espen

This discussion is closed to new replies.