Discussion Locked

Home Networking

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

NO. 1 PROBLEM: I have a couple of computers that I am trying to connect together on a personal network. I'm using a Belkin USB Direct Connect Adapter. I have connected it to both computers on available USB ports. I have installed the drivers on both computers. I have installed File & Print Sharing for MS Networks on both computers. BUT, one computer allows you to share the hard drive. The other computer does not display the "Sharing..." on the right-click menu.

NO. 2 PROBLEM: Upon attempting to go through the Home Networking Wizard, I get the dreaded Blue Screen of death (Fatal Exception 0E). This error ocurrs just have you decide what whether you're going to use MSHOME or specify your own name for the Workgroup. It doesn't matter if you use the default or your own setting. The Blue Screen ocurrs in either case.

Is there anyone out there that would have any idea on how to fix these issues?

5 replies

by dudad

What protocols have you installed in your network? TCP/IP, IPX/SPX, NetBeui?

by mcintyrem

Both TCP/IP and IPX/SPX are both installed on the computers. I tried removing IPX/SPX from one computer, but that still didn't solve my problem.

by a.c

You have got "Client for Microsoft Networks" installed ? if not then
add > client
Have you actually enabled the file and print sharing on both machines ?
Network Neighbourhood > properties > File and Print sharing (large button) then selct the "I want to give others access to my files" tick box.
As you are using TCP/IP can you ping both computers command prompt "ping " where is either the name or the ip address of the machine at the other end (you can find the ip address using winipcfg, if you use their names they will have to know about each other, see hosts below)

Don't bother with the home networking (unless you realy need to be held by the hand)
If you are using TCP/IP set one machine to have an IP address of 192.168.0.1, netmask 255.255.255.0 (TCP/IP properties > IP address > specify an IP address)
On the other machine specify 192.168.0.2 with the netmask 255.255.255.0

Make sure you set the computer names under network neighbourhood > properties > identification tab, and set both to have the same workgroup name (HOME is fairly common, think of something creative)

tab to Access control and make sure share level access is selected.

on each machine open hosts.sam in c:\windows and edit it to read
192.168.0.1
192.168.0.2
then save it as hosts (make sure it doesn't put a ".txt" on the end if you use notepad)

That should get you up and running

A.C.

by mcintyrem

Yes, the Client for MS Networks is installed. Yes, I did click on the File & Print Sharing button and activate both options. No, I cannot specify an IP for these machines because they will be sharing the Internet from the main computer using a 56Kmodem. The ISP has to provide the IP address or you lose the connection.

This discussion is closed to new replies.