Question Locked

home security using telephone

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good day to everyone!..

Our groups now wants to design a project "HOME SECURITY USING TELEPHONE". In order to do so,we must have a complete "BLOCK DIAGRAM","SCHEMATIC DIAGRAM", and a "PARTS LISTS" to this project. But unfortunately,we dont have a parts list and schematic diagram. Now I ask from anybody who help me will to fulfil our needs and come-up this project.
here are the brief description of our project, "When someone enters to home, the control box which is a combination of a sensors to detect a thief,directly triggers the telephone without human intervention".
below are my questions that must have a solution..
1.Do you have a "schematic diagram" of this project? or even a related schematic diagram for this project.
2.part lists?
THANK YOU AND MORE POWER..

NOTE: if anybody help me, kindly send me to my email address at yejoramil@yahoo.com

4 replies

by drowningnotwaving

You wrote:

[i]here are the brief description of our project, "When someone enters to home, the control box which is a combination of a sensors to detect a thief,directly triggers the telephone without human intervention".[/i]

Put a flat stick in the gap at top of door. Balance a phone on the stick. When thief enters, the stick sensor directly triggers the telephone (onto the top of thief's head) with no human intervention.

Objectives met.

Part list - phone, stick and door.

Seriously, who is this? This has to be someone taking the p1ss???

In less time than it takes to spell 'schematic', google had all the diagrams and the entire thesis completed.

by yejoramil

i am JOEY L. BASBAS a graduating students in Bachelor of science in computer engineering. since the requirement to pass this course is he acomplishment of my project study or thesis. I post my question this website so that I gather some information about my thesis.

by drowningnotwaving

Joey,

If you're smart enough to work out how to get on to a tech forum, get your own password, get into your degree, then ...

I'd suggest you're smart enough to Google this. I did, it took two minutes to get about 30 schematic diagrams, parts lists and complete definitions on how it all worked.

You can cut and paste your way to your masters degree.

This discussion is closed to new replies.