Discussion Locked

Hotswap Exchange Servers

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am looking for a method of having two hotswap exchange servers mounted in my racks for immediate use in event of any disaster.
How can I accomplish this without using clustering?????

7 replies

by dcassat

I know that Compaq offers a hardware card that links two servers together to facilitate failover but the solution is as expensive as Vinca's Co-standby Server which offers exchange failover. In this configuration your servers need not be the same and the servers can serve in different roles. If the Compaq card is a better solution, someone else perhaps can supply more info, I've forgotten the name of the product. Good Luck

by duwaned

Hi.

Compaq has a concept whereby you have 2 identical servers, and connect the 2 by a serial cable. The standby server moitors the main server for problems. When the standby server does not get a "heartbeat" from the main server, it powers on. The way to get around the disk issue, would be to have an external drive array which gets plugged accross to the backup server in the event that the main server goes down. Contact an authorized Compaq re-seller in your area, and they will be able to give you more details about this.
Hope this help.
Regards.
Duwane

by duwaned

Hi.

Compaq has a concept whereby you have 2 identical servers, and connect the 2 by a serial cable. The standby server moitors the main server for problems. When the standby server does not get a "heartbeat" from the main server, it powers on. The way to get around the disk issue, would be to have an external drive array which gets plugged accross to the backup server in the event that the main server goes down. Contact an authorized Compaq re-seller in your area, and they will be able to give you more details about this.
Hope this help.
Regards.
Duwane

This discussion is closed to new replies.