6 replies
by magala Accepted solution
by markp24 Accepted solution
Hi, does your bios detect the drive?
Also it may nto be detecting it if its not getting enough power (maybe you need an external power source)
by robo_dev Accepted solution
A normal drive motor spins up and you hear it do a little click-click noise when it initializes.
If the drive is dead silent, or of the drive goes click click click....whirrrrr....click click click....whirrrr then spins down, it's time to send the drive to a data recovery company.
by thechas Accepted solution
I presume you are using an IDE to USB adapter to connect the drive.
Is external power connected to the drive?
Do you hear / feel the drive spin up when power is connected?
Do you have the USB device icon in the system tray?
If the drive is spinnin up, and you have the USB device icon in the system tray, open settings / control panel. Select administrative tolls, computer management, disk management.
You should see your external drive listed but grayed out. If so, you need to click on the drive and mount / initialize the drive. This is not the same as formatting.
If the drive does not show up in disk manager, then you need to step back through the power and USB connections to get the drive to recognized by Windows.
Chas
by Wizard57M-TR Accepted solution
Are you using a USB hd connector? If not, you'll need to run power cable from the
PS to the drive. Does this drive have jumpers? At only 40 gb, it appears to be of an
older generation, if it has jumpers, may need to set it as "slave" or "cable select".
You may be better off installing it inside the case as a second HD and not as an
external device.
by oh smeg Accepted solution
Many new Windows OS's are incapable of reading older Partition Types even if they are NTFS as New Security Features in the Newer Versions of Windows do not support the older Partition Types.
Also does this External Case actually work with this computer that you are using? If it's a newer M$ Windows version the Chip Set in the External Case may not be supported even though the case worked perfectly with XP.
Does this drive show in the computer that it came out of? If it does then your current issue is to do with the computer and/or external case that you are now using.
I would try refitting the drive to the computer that it came out of and testing the drive with Seatools for DOS which is available free here
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending