Question Locked

How can we print using GeoFrame 4.2 on Red Hat Enterprise Linux 3?

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

before we use this command for print "RAS" format in old version of Geoframe Software (that we installed it on workstation),
lp -d printername filename.ras
but in new version of Geoframe (VMWare) that we install it on PC, we can not used this comman,

and also we can not use these command to convert "pds" to "rst" and "rst" to "ras":
hplot: we used this command to convert "pds" to "rst"
rf: we used this command to reformat "rst" to "ras"

14 replies

by peconet tietokoneet

Make sure you have a USB controller in your VM (i.e. power off vm, go to vm > settings, add hardware, select USB controller, finish) then when your VM is powered up and has focus, any USB devices that you connect will be connected to the VM - so plug in your printer and install as normal.

Red Hat Enterprise Linux 3: System Administration Guide:
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/3/html/System_Administration_Guide/ch-printing.html

by bagheri.soheila

I tried to add our ploter, but the software can not find our ploter, it shows all ploter except our ploter?

by bagheri.soheila

when I write this command " redhat-config-printer", the software does n't open the main window, It ask me to insert password for root?

by bagheri.soheila

when I write this command " redhat-config-printer", the software does n't open printer configuration window, the software ask me to insert password for root?

by peconet tietokoneet

When you first installed RedHat you had to put in a password to become the Admin, then you had to put in a user name. When ever you have to do some configuration(s) in Linux you have to put in your password to become the root user so that you can have full access.

by bagheri.soheila

I add our printer, I want to edit Printer driver, but I can not find our printer model in the list? how can I add our printer model? our printer is HP DesignJet 1050c

by peconet tietokoneet

Red Hat Enterprise Linux 3 uses the CUPS printing system. If a system was upgraded from a previous Red Hat Enterprise Linux version that used CUPS, the upgrade process preserved the configured queues.

Using the Printer Configuration Tool requires root privileges. To start the application, select Main Menu Button (on the Panel) => System Settings => Printing, or type the command redhat-config-printer. This command automatically determines whether to run the graphical or text-based version depending on whether the command is executed in the graphical desktop environment or from a text-based console.

To force the Printer Configuration Tool to run as a text-based application, execute the command redhat-config-printer-tui from a shell prompt.

More here:
http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/3/html/System_Administration_Guide/ch-printing.html

by bagheri.soheila

I did all these steps, but I can not find printer driver for HP DesignJet 1050c it the list? It is difficult to find Linux printer driver of HP DesignJet 1050c?

This discussion is closed to new replies.