Question Locked

How do I copy vista OS to new drive?

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just got a new 2.5 250GB drive for my laptop and would like to copy the OS on to it ready to insall. The laptop didn't come with a disk so a clean install isn't pos. I don't need any files or folders as I already have them backed up on disk. Could anybody tell me how I go about doing this? Thanyou.

13 replies

by cmiller5400

You will need an install disk to do a fresh install or you will need to use disk cloning software to copy the drive from one to another.

Some disk cloning software would be:

Norton Ghost
Acronis True Image
Clonezilla

by sue t

a lot of computers now a days do not come with actual CDs but have a recovery partition on the hard drive that has everything you need, this partition is sometimes hidden. Also, whenever I buy a computer now adays one of the first things that happens when I turn it on is a message comes up telling me to make recovery CDs or if a message doesn't come up there is documentation telling me to do that. Contact the laptop manufacturer and ask them and they should be able to help you or send you the CDs.

by baxt76

It does have a recovery partition, does this meen I can load the OS onto the new drive or will it just reload the old drive as it normaly would?

by oh smeg

And M$ is that the system makers supply a Recovery method for the OS & installed programs to be reloaded in the event of a failure.

To this end the System Makers incorporate a Recovery partition if they do not supply Recovery Disc/s.

If there is no Recovery partition or Recovery Disc's you don't have a Legitimate Copy of Windows and you have purchased from a Pirate.

Though if you have a Name Brand NB you can always contact that maker and buy a Recovery Set for your Model NB.

Col

by baxt76

or would it just be to recover the running drive, I created a back up disc before the laptop was used for the first time.

by oh smeg

Whatever software comes with your computer new as well as any additional required Drivers. It's what you need to install the OS onto a new HDD but you first need to check that it actually works.

If recorded Disc's are not stored correctly they get wiped very quickly. The obvious things to protect them from is Direct Sunlight and excessive heat.

Stick the First Disc into the Optical Drive and try starting the computer. If the system doesn't boot from the Optical Drive you need to set the Boot Order in BIOS to Optical Drive before the HDD and save the changes when you go to exit the BIOS.

The system will then boot from any Bootable Optical Disc or at the very least give you the option what you want to do. ;)

Col

by mamies

I would copy the recovery partition with a program like this http://ping.windowsdream.com/ (It is free and the instructions to use it on are on the site somewhere) onto the new Hard drive.

Then I would install the new hard drive into the notebook and then try and access the recovery partition.

Remember when you do this, do not format your old Hard Disk until it all works because it has your recovery partition on it.

by televerenz

I have used Acronis sucessfully but it was on a desktop where I could have both hard disks attached at the same time. You might be able to set up the new drive as a USB attached device with an adapter and then move your data that way. After the image has been moved then you move the physical drive to the machine.

by baxt76

If I attach the new drive by usb, then do a dsk 2dsk recovery , but choose the new drive as the location for the OS. Am I right i thinking it would load it to that, the other disk I can reformat later.

by oh smeg

Though with Acronis you need to copy the Recovery Partition First or it will not be in the correct position on the HDD.

I have used Acronis many times to Clone a NB HDD to a External USB Enclosure without any problems.

Only thing is that you need to replace Multiple Partitions in order if you use this. ;)

Col

by baxt76

When you say multiple partitions, my laptop drive is divided into 2, do you mean I will have to delete 1 so that the drive is just 1 partition?

by oh smeg

No but you have to copy 2 Partitions with cloning Utilities like Acronis. As These Cloning Utilities only look at Individual Partitions they need to copy 1 Partition at a time.

So in this case you need to run the Cloning Utility twice. The first time for the Recovery Partition and if you want to copy all your Data & Settings across to the New HDD you then need to repeat the process again for the Boot Partition.

With the Recovery Partition you leave it the same size as it was and then when you do the second Partition which is what you see as the C Partition you tell the Cloning Utility to Use all of the available space left unused on the HDD.

If you don't want to copy your Data & Settings just copy the Recovery partition to the same size as it is and then boot the system off the Recovery partition and run the Windows Setup Wizard to install the OS.

Col

This discussion is closed to new replies.