Discussion Locked

How do i correct spooler32 erors

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
One of my users upgraded to AOL 6.0 on a win98 (first Edition) machine. now when he trys to print from any MS office program, he gets spooler 32 error. How would you suggest i remedy this.

9 replies

by yagar

Look in the Win.ini and see if this is in there

[windows]
load=spool32.exe

if it is remove it (place a ; in front of it)

I have not seen this with AOL but I have in several other situations

good luck

by fenaikh

Hi
Generaly spooling problems comes from hard disk (virtual memory) and spoling or what microsoft suggest in the following article so please check hard disk with scandisk to see if any hard disk problem,
lost clusters, ect.. then check space to see if there is enogh space for spooling.
and i suggest to read this microsft article too.

Article ID: Q191949
How to Troubleshoot Spool32 Error Messages
http://support.microsoft.com/support/kb/articles/Q191/9/49.ASP

Note: pls ckeck also for viruses.
good luck
mohamed

by rob k.

I recently ran into this problem with three comuters here where I work.
The first thing that I had done was to create a shortcut to the spool32.exe in the startup folder.
When this did not work on all of the machines (did work on one)I then ran sysedit and edited the win.ini file. I added the line "load =C:\windows\system\spool32.exe" minus the quotes.
This worked on one of the last two machines.
For the last machine I renamed the spool32.exe and the spoolss.dll files and copied new ones into there place.
So far I have not had any problems. This was done about two months ago.

Hope this helps
Rob K.

by kmerrillt

What type of printer are you using? You should be able to diasable spooling under tools for your printer.

This discussion is closed to new replies.