5 replies
by iansprn Accepted solution
by seanferd Accepted solution
The Ubuntu forums, or see the documentation. e.g., http://ubuntuforums.org/showthread.php?t=501664
http://www.google.com/search?ie=UTF-8&oe=utf-8&q=ubuntu+secure+graphics+mode
https://help.ubuntu.com/10.04/index.html
To run in safe graphics mode, you need to reboot and choose safe graphics mode from the boot menu.
Then you'll either need to find the correct graphics driver, or change xorg.conf to load the correct graphics driver. Xorg auto-config has obviously chosen poorly for the driver.
by ---tk--- Accepted solution
boot into safe gfx mode, go to the gfx manufacture's website, download the correct drivers....
hit ctrl+alt+F2 (F1-F7) > enter username and passwd > run #sudo service gdm stop > go to the downloaded driver location (example: cd \home\user\Desktop) > type: ls (this will show all the files at the location... make sure the driver you downloaded is at the location you navigated to) > then type: sudo bash DriverName (if it Nvidia.x.x.x.x, just type Nvid~tab~, this will auto complete, so you will not have to type it all out).
it should then run the install script and install your driver... at least that's what I do... or you could try enabling restricted drivers and have ubuntu recommend a driver, and install it through the GUI...
by iansprn Accepted solution
by -cc- Accepted solution
I used Google to search for "Ubuntu 10.04 blank screen". There are several different solutions provided in several different forums. You may also want to add "dell 700m" at the end of the search for your specific issue.
The solution for my 710m with an Intel video chip was to add i915.modeset=1 after the words quiet splash in the grub bootloader.
If you did an upgrade from 9.x to 10.04, you may have to hold shift during boot to get to grub. You can add the sting I listed above by editing the boot string then ctrl-x to boot. If it works, you will have to make the change permanent by editing the grub bootloader string after the system is up.
This post is not meant to explain exact steps but rather point you in a direction for a possible solution. There are many different solutions depending on the computer and graphics card you are using.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending