16 replies
by asaunders12 Accepted solution
by Wizard57M-TR Accepted solution
usually the only drivers you would need are for hardware components, such as
video, optical disk drives, wireless and/or ethernet adapters, mouse/trrackpad,
and sometimes a hard drive utility. As for applications, unless it is in reference
to some peripheral such as a printer, it is rare that they need their own driver.
My advice is to know your hardware prior to installing the OS, and download
any drivers that may be needed prior to installing the OS, though many times
with later Windows versions the base Windows drivers at least provide some
functionality, then you can go on the internet if needed and grab specialty
drivers. Download and save your hardware drivers on their own installation
media, such as a CD/DVD disk or USB thumb drive. Then when needed you
can insert the disk during or after Windows installation.
by asaunders12 Accepted solution
by Wizard57M-TR Accepted solution
Well, in the case of the camera, know the make and model,
visit the manufacturer's web site, and see what they offer.
Windows may have some rudimentary camera applications,
and my favorite Windows image handling program does pretty
good with images from a wide range of formats...
IrfanView...it's freeware, I highly recommend it.
Other peripherals would need the same research.
by oh smeg Accepted solution
Under Windows systems before Vista Sound Cards, Video Drivers, Network Drivers both wired and wireless, Web Cams, and things like Printers, scanners and so on.
When it comes to Linux it really depends on which Distro but overall WiFi Drivers in a lot of cases.
Col
by asaunders12 Accepted solution
by oh smeg Accepted solution
It tends to pickup most Hardware Drivers as it installs. Though things like Video Capture, printer and scanner drivers will be needed after it's installed.
Even though it picks up most of the hardware connected when it's installed you may however need to update drivers to get the best performance.
With XP unless you are looking at a Slipstreamed Install with the specific drivers for your Hardware which is what most System Builders Supply other than Creative Sound cards it will need drivers for just about everything especially Realtech Sound and Video Card and all Network Connections including WiFi, Modems and so on. So if you are using a Microsoft supplied Install Disc for XP expect to need drivers for everything including SATA HDD. If you have one of the M'Boards that needs SATA Drivers it's easier to Slipstream a Install Disc with nLite available free here
As most new systems no longer have a Floppy Drive to install the SATA Driver from which is what XP Install Requires.
Col
by rdconway Accepted solution
by phudson38 Accepted solution
by rdconway Accepted solution
by oh smeg Accepted solution
Look at your Installed Hardware in the Device Manager and Google them to see if there are 7 or 8 Drivers.
Most XP Hardware has 7 Drivers from it's maker but as Dell is a System Assembler they are not the Hardware Maker.
Col
by rdconway Accepted solution
by rdconway Accepted solution
by oh smeg Accepted solution
Firmware isn't like Drivers it's more like the BIOS in the system and ideally should be Platform Independent. ;)
Col
by rdconway Accepted solution
by oh smeg Accepted solution
Yes that is what Platform Independent means it doesn't matter which version of Windows or for that matter any other OS that you use. ;)
Col
This discussion is closed to new replies.
Trending Software posts
Sort by Trending