Discussion Locked

How to configure BDC over the Internet

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to setup a BDC in a remote office. The Remote office has 784K DSL connection to internet and it's own ISP and IP Subnet form the main office where the PDC resides. The PDC and BDC are seeing each other, but the Win98 workstations can see PDC but can not change their passwords, map a drive, etc. Is there a specific way to set this up? Do I need to setup a Server to Server VPN? is tat possible? Please Help! Thanks

Dave King
kingd@efiinfo.com

7 replies

by davidj

It sounds like you need to set up a WINS server. Make sure that the IP Addresses for each server are static in the WINS Server.

by grant.hong

I'm not sure what's meaning of "seeing". So I can only give you some ideas to do trouble shooting:

1. On remote branch office win98 machine, ping with IP adress of PDC. If successfule, it means the physican link is OK

2. On remote branch office win98 machine, run nbtstat to see name resolution of PDC is successful. I guess this will fail. In this case, setup a WINS server

by lintadsl

Win98 can not change their passwords?
Win98 workstations can change password(for windows) and Network password at same time.
There is a check box if you click on password icon in Control panel to change windows password and network password.

Onmap a drive issue, are you using login script? A drive you want to map is in PDC?
If you see PDC in Network Neighborhood from Win98 workstation, you should be able to map a drive. Or you can run login script.

I am not sure setup a Server to Server VPN. I guess it depends on your routers between main office and remote office.

If you need a help runing login script. let me know.

Good Luck.

This discussion is closed to new replies.