Discussion Locked

How to connect a Laptop on a network

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Laptop and i need to connect it to our network here in our office so i can surf and use the network printer. How do i connect it? How do i start? pls help. thanks.

9 replies

by jdroba

First of all, need to know what OS you are using, since it will make difference as to how you connect. If running WXP or W2K, then after you plug in the computer to the network, you will need to do the following:

1. Since it has not been on a network before, you wiill need to logon as a local administrator

2. Right-mopuse click on My Network places ans select PROPERTIES.

3. Right-mouse click on the LOCAL AREA CONNECTION icon ans select PROPERTIES. Select the TCP/IP option, then select PROPERTIES. Use either the DHCP option or the Static IP option depending on what your network is using (check with your network administrator). Use the ADVANCED tab to configure any DNS or WINS options. Close back to the Local Area Connection Ico area.

4. Make sure that nothing is highlighted, then slect the Network Identification Option (this is also avaialble under the Advanced Tab in the pull-down menues). Follow the steps to add the system to the network. You will need to have permissions to be able to add a copmuter onto the domain. If you don't have those permissions, then you will need to have someone with those permissions add the system for you.

by =t=

if you are using 98 all you have to do go to contol panel and network. ask your system admin bout IP add and DNS no, if your network using DHCP all you have to do is name your computer and choose optain Ip address automatically. good luck

by Member 33509877

All the above are good, but it's worth noting that you need to install a network card first, otherwise you aren't going to get a physical connection

by still_learning

The first thing that I would do is check with the Network Administrtor to see if this is allowed. Many companies do not allow equipment from outside the company to attach to their network, especially without their knowledge. If yours is one of these, then you will not be able to attach to the network without their assistance. You would be better off being above board with your needs rather than trying to sneak it in. Hope this helps.

This discussion is closed to new replies.