Discussion Locked

How to connect using Linksys DSL Router

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using a Linksys Cable/DSL router. I used to have no problem using it in US. However, I am trying to use it in Hong Kong. It's a ADSL service, and it's using PPPoE technology. However, I can't use the router to connect. Although I get the IP address and subnet mask, it's missing the gateway. When I use a regular computer to connect and found out that the Gateway is set the SAME as the IP address. So, my question is how to use the PPPoe function in the router so that I can get the gateway manually/automatically the same as the IP address in the Linksys Router.

thanks

2 replies

by granite2

I believe I have some information you may find helpful. First, a smart router will have some form of set up/configuration utility. Usually, you can connect to the router by opening IE on another machine connected to the router, and then type in the router's IP address. Hopefully then you will have some type of configuration screen for your router that you can adjust the settings with that is displayed on the browser. If not IE, check your router's documentation about using Telnet to access the router's configuration menu. Again, you would just open telnet (Start-Run-Telnet), and then type in the IP address of the router (then name and password, usually the defaults are root / root). Once you have a configuration menu, you will be able to adjust the router's settings.

If you can not access the router with either of these two methods, you will have to contact the manufacturer about how to make the changes.

Good luck, I hope this helps. Grant Miller

by rayhklai

Hi, Grant, thanks. But I have already do that. This router allows both static IP and dynamic IP (pppoe) connection. I ddon't want to put in the IP address manually, cos it's assigned by PPPoE. However, the problem is I can't receive the gateway info from the ISP automatically..

This discussion is closed to new replies.