Discussion Locked

How to copy user accounts on Windows NT

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there anybody know how to copy user account on Windows NT without using BDC. Im installing another server/domain and i wanted to copy all the user account.

15 replies

by riann

I'm a little confuse about your question. If you would be copying in the same domain. Then the BDC will do. But if you are planning to create a new domain then you will be re-creating all the users. To make things easier, use the ADDUSERS utility found in the NT Resource Kit. It will dump all user and user info(except password) and you can re-create all the users from the text file where you dump the users from the old domain. Also you can modify the text file before re-creating the accounts tomeet you needs.
Hope this helps.

by gel

No im not creating the same domain. im creating another domain. I have here plenty of Adduser Utility but all of this does'nt help me(includes the one you mention).

The solution i need is to copy all user account including password and transfer it to another server.

Thank you..

by nate from ri

I don't know of any way to transfer accounts w/ passwords. Would establishing a trust relationship between the new and old domains solve your problem? This would give users of the old domain access to the new.

by gel

I already done this but the problem is that one the other domain is done they cannot get an access to their account. I have here another soulution but i'm not comfortable with it ..i have here cloning software send to me by my friend but the problem is the hardware is not the same..

one of the limitation of the cloning software is that you need the same hardware in order to clone the server.

by nrodriguez

hear me out on this one. Install it as a BDC. synchronize the servers. disconnect take to new location. boot up and promote to PDC in server manager. this is the easiest. no reinstall required. if you need a new SID go to symantec.com. ghostwalker can change the SID. there is no need to copy users to a file, etc....

if you are trying to change the domain name... Good luck figuring that out! you'll have to reinstall.

you might try www.l0pht.com "el-zero-pee-ach-tee". download lophtcrack. run it and it decodes username and passwords. this might help you get a start but without reinstalling...

hope this helps.

by gel

I'm interested with the first item you mention. I tested this and i think this is possible what my problem in this is once you promote BDC the PDC demoted.(what it my PDC won't boot up my BDC won't work anymore)

Correct me if im wrong is the software in Symantec can promote my BDC without demoting PDC?

also what do you mean by SID never heard of that?

by doubledown

can you tell me what you're trying to do? (not about the user accounts, i mean what is the reason for having to move the user accounts?)
is it absolutely necessary to have the user accounts in both domains?
the reason i ask is that is just about the last thing you want to do in your network....there are usually much better alternatives

by gel

Ok here it is..

I have an existing PDC domain name(nt_serv_1) w/ BDC domain name (bdc_serv_1) and it's working great. Since of the load of the nt_serv_1 i decided to split or move some of the user accounts and create another PDC (nt_serv_2).

Inoticed that if i will handcode some accounts to my newly created PDC (nt_serv_2) it will take a months or even 2 months to re-write again their accounts.

Hope that it's clear now.

Thanks ..

by aekland

The software can be found at www.aelita.com.
nrodriguez is correct about the bdc if the computer is on a new network or else you will have to change the sid. The sid is the unique id that identifies the account or domain. Everything in NT has a sid.
If you are doing that you can create the bdc, remove it from the network and promote it. Change the sid and the domain name and then attach it to the network. This would give you a new domain with identical accounts.
Goon does ask a good question. Can you give more information about what you are doing.

by gel

Thanks from the site.. i'll go there and read some stuff.

by the way on your comments you told me that "remove it from the network and promote it" are you sure about that because i already tested this and it's not possible.

Why? because once you promote BDC you need to attached it to the network and
log in to the PDC.

by aekland

"Why? because once you promote BDC you need to attached it to the network and
log in to the PDC."
How do you mean? If you promote a BDC it is the PDC. If it cannot find the PDC when you ask it to promote itself you can still do it, it will just use the local sam instead of a last check for new info on the PDC. If you do not see anything in the server manager check the view settings. If you do not change the domain name, sid, and computer name (if left as a BDC on the old domain) you can runinto conflicts unless the new domain is isolated from the old.
I just did something similar where I moved a BDC to an isolated network and promoted it for 2k testing. If this doesn't help please post an explaination of your promotion issue.

by gel

I already tested this BDC issue and still doesn't help me that's why im searching for alternative solution.

I tested copying user accounts on Unix and Linux and it's very easy to transfer user account, home directory and password that's why i'm thinking that all of this is possible.

I tried applyring the same procedure as i've done in linux and apply to Windows and NT and it doesn't work.

My friend told me that during on his Seminar on Windows NT administration his speaker mention how to do it but the problem is that time he is not that interested on that part.

This discussion is closed to new replies.