18 replies
by paturiravi26 Accepted solution
by internetspider Accepted solution
Its illigal man!
If it is your e-mail then we can help you.
by tony hopkinson Accepted solution
Email your friend threaten to kill his mum if he doesn't tell you it.
Alternatively if you don't want them to find out you are in fact a twat and not his friend at all.
Send your request to Abuse@Hotmail.com.
by dr dij Accepted solution
" how to crack my friends mail
i want to know if there r any tools for knowing passwords of others mails . "
To crack your friends mail, simply steal the mail, take a knife or envelope opener and open it! Take what you want, checks, statements.
THis is probably illegal even in india.
And your friend will not be your friend anymore. You will be thrown in the slammer where you can get to know other guys really well.
by tig2 Accepted solution
It is illegal, immoral, and probably fattening. Why would you do such a thing?
*Oh good, I have earned the right to slap Palmetto!*
by charliespencer Accepted solution
by neon samurai Accepted solution
by the scummy one Accepted solution
If so you will need an encryption key. If not, the mails have no passwords, although the account probably does.
Or, if you had a spelling mistake, and you are gay, the proper way to ask would be "how to enter the crack of my friends (Male)". But this would be the wrong forum for it.
If you want to find out Internet passwords easily, you should be 'linked' to the Internet physically. Ground yourself well (at the ankle). Put the modem, DSL, or cable line into your mouth. Around your neck, tie some bare wire (exposed wire). The other end of the exposed wire should have a wall outlet plug. Plug it in.
You are now surfing the Internet (physically) and have access to everything that floats by you.
by neon samurai Accepted solution
Assuming good faith:
If your friend has lost there email password, talk to the mail server support or administrator.
Assuming good natured faith:
If your trying to impress your friend by breaking into there email; don't. Find something more constructive or interesting to impress your friend.
Assuming bad faith:
This isn't a forum for cracker parasites. You'd best be on your way now before a real hacker decided to reboot your computer for you.
Or, stick around and one of the other fine readers will probably give you the steps to do it. Be carefull though as it usually involves shorting a bit of hardware at just the right time with a screwdriver.
by tony hopkinson Accepted solution
by w2ktechman Accepted solution
You do not want to crack your friends account as this is an illegal act in most countries. It is also very immoral by most peoples standards. Please reconsider. If you are looking for a 'prank' to play, please give us a little info, and we can probably come up with something good.
If you still want to learn to 'crack' a PW or into someone elses system, please read my next post. But I urge you not to actually try it.
by w2ktechman Accepted solution
Edited to add new top secret monitor information (flat panel), and to fix some typo's
Please read my previous message first. This is a crack into a computer and its files and folders. However it is not meant to get into protected files (such as encrypted, or alternate installed SW (3rd party)).
This is only intended as a guide. Please check out the laws in your area before attempting to crack into someone else?s system. I cannot stress this enough. Continue at your own risk!!! Don?t forget, it is not too late to back out and reconsider (best option)!
Ok, Cracking a Win 2K/XP administrator PW and name (and enabling the account if disabled). This will give you full access to the system with unlimited permissions. If you are told that you do not have permissions, you can GRANT YOURSELF permissions, as this is a SUPER USER account.
First, you will need some HW and basic tech skills.
1. Antistatic wrist strap
2. Iron or Steel rod 3/4 to 1 foot long and 1/2 to 3/4 Inches round.
3. Electrically conductive gel
4. A new spare HDD (within the last 3 years)
5. A keyboard manufactured after 1997
6. A grounding wire -- up to 5 feet
7. A set of screwdrivers (small) with Philips, flat head, and Torx tips (or 3 small screwdriver sets)
8. Small hammer (not required but useful)
Ok, before you begin, put on the antistatic wrist strap. I cannot stress this enough. Follow its instructions to 'ground' yourself. But later this will not be enough, you will use the grounding wire for the more intense part.
Get your screwdrivers out, along with the spare HDD.
Open up the HDD. Note there will be screws under the labels. You can press down across the label to find the screw holes.
You need to pull out PLATTER 1 (top) from the HDD, and the magnets need to be removed from this drive.
Keep these handy.
Start the computer, but do not attempt to log on. Press Ctrl -- Alt -- Del. Type in any random set of letters and/or numbers (not special characters though). You MUST do 13 characters though, this is the key. There is a 'special' 'hidden' 14th character that you will need to access.
Use a small flat head screwdriver in between the P and O keys (funny story, they added it here for Override Password -- see the humor?). They added a special chip under/between these keys on all keyboards manufactured after 1997. This is a little known fact and very hard to obtain info (I can get into big trouble for posting it if they find out who I am). If you are unsure about your keyboard age, look underneath it. It should have a manufactured date on a sticker. If you cannot tell, go get another keyboard.
Back on point, use the screwdriver to 'pop' the chip. If you did not hear a pop, try again. It is a small chip that is directly under and between the O and P keys. I prefer using a small hammer with not too much force here, but not using one should work fine.
If you had 13 numbers and letters, you should see a 14th one flash quickly, but it is so quick that I rarely see it myself. The boot sequence may hang here. This is what should happen. Ok, power off the system.
Open the case and unplug the HDD (boot drive if multiples exist). Then remove the drive, taking precaution against damage.
Now with the boot HDD in one hand, grab the 1st platter from the spare drive. Place the platter underneath the boot drive (by the board and chipset). On the top, use BOTH magnets in a clockwise motion on the top of the boot drive. You must make at least 4 complete passes, but 6 is better. Since Windows was told to 'unlock' the password (via boot characters above), it is free to replicate on all platters and 'jump tracks'. That is why we need the platter underneath. And being the first platter means that it is the best possible platter to install it on.
Now put the second HDD back together being careful not to damage it. This should be put back into your machine to keep the PW until later, but it is not needed right now.
Ok, now is the tough part. We need to unlock the ADMIN account and reset it to administrator (if it was changed and disabled). To do this, on the boot drive look for where the platters all meet. There should be a screw or nut holding them all together. You need to 'ding or dent' very LIGHTLY on the top of the HDD case, away from the magnets and HDD heads. Some people like to put it at 180 degree from the arm for the heads. I should be visually dented, but not interfere with the HDD operation.
Now the HDD and Windows need to both be synchronized with this new PW mess that we created. The PW is probably floating around randomly on several platters. So install the boot drive back into the computer. Now get the small flat head screwdriver ready.
Boot the computer (it may make a bit more noise than usual, but do not worry.
OK, for a few seconds this should display on the screen "BIOS Revision". Look closely at the "S" in BIOS. Looks a bit off or not normal doesn?t it (requires really close investigation, sometimes it has been reported that someone has to look through several boots to notice it). Ok, this S is a keyword for "Synchronize" after the PW unlocking. This gets triggered in the BIOS whenever the O and P keys were tampered with.
Anyway, use the flathead screwdriver on the S on the monitor. To get it right, you may need to try several times. I suggest a couple of reboots to get setup properly.
If this is an older monitor (CRT) you may want a small hammer to aid.
Without too much force, you want to 'punch' the "S" in BIOS out. Quickly turn off the computer. Note: this is an update and highly restricted information. On all ?tft?, and ?lcd? monitors, the crack that is created from punching the ?S? out is automatically fixed on the next monitor boot. On the next monitor boot the flat panel ?sensors? indicate this activation and a gel will spill across the top corner. All you need to do is wipe it dry with a micro-fiber towel and it will be fixed. Newer monitors are better at this, and hold enough gel to do this operation 3 times before a refill.
Now for the final preparation before you obtain full access to the system. You will need a good ground so get out the grounding wire. Tie it to the computer case if another good ground is not close by. The best ground would be the 3rd (or grounding plug) in the wall socket. Bare about 1/3 feet of the other end and tie it around your ankle. Use the electrically conductive gel all around your hands and ankle (where the grounding wire is attached).
This step may take several tries, but it will be well worth it when done properly.
Turn the system on and very quickly plunge the metal rod into the power supply of the computer. A small hammer to help may be needed. BUT be careful as not to plunge it too far, we are looking to get a 'spike' not destroy the computer.
WARNING: Do NOT wear gloves!!! We need the extra grounding to do this properly, or else it may destroy the computer and put you at risk!
If you did not feel a slight jolt (very slight), try again with a little more force.
Ok, when done properly, clean up. Now restart the computer. At logon enter the username ADMINISTRATOR and for the PW type "P_W_R_E_C_O_V_E_R" and press enter. Yes, those are underscores.
You now have full access to the system
by sgt_shultz Accepted solution
my gosh, I hope you've hidden your identity well. the authorities are not going to be very happy with you...
btw, it works better if you put the bare wire in your mouth...
by the scummy one Accepted solution
by charliespencer Accepted solution
No wonder I never get any further! Now that I have the complete instructions, I can finally finish this up!
Now, where did I leave that copper wire? I think I have some conductive gel left, but I've used a lot of it for other purposes...
by w2ktechman Accepted solution
so a lot of this is proprietary knowledge. This is "by the book" information. Of course there are plenty of shortcuts (like you suggested), but I wanted only to post the actual process here.
I am sorry, but I cannot reveal any more information of that part of my past, as 'they' are already looking for me for other information leaks here on TR. My identity has been changed soo many times I cannot even say what my real name is anymore.
by dr dij Accepted solution
glad these posts are anonymouse. You're probably tapped in via an 'onion' router anonymizer service.
Bet you've changed your hairstyle so many times now you're not sure yourself what you really look like. Probably living on peanut butter, enuf to last you a couple days.
by sgt_shultz Accepted solution
This discussion is closed to new replies.
Trending Software posts
Sort by Trending