Discussion Locked

How to directly connect 2 pc's via dial

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to connect my laptop to my PC directly through their modems and a telephone line, so I can exchange files between them. How can I do this? My laptop has win2k and win98 installed. My Pc has win98 only.

9 replies

by steffeno

Set up dial-up networking server on your windows 98 machine. Go to Start>Settings>Control Panel. Then click on add/remove programs. There will be three tabs. Choose the middle one. Then look for communications and put a tick on the dial-up networking server. On the client side (laptop), you just have to create a new connection to connect to your PC.

by steffeno

Yeah, you can do exactly what David says. Or alternatively, you can buy a USB to USB direct connection (NetLinQ brand). Just link the pc and laptop to their any available USB ports, install the software and you have a network. This type of connectivity provides faster transfer rate than a direct cable.

by buckle

Have you tried using the "direct cable connect" facility found through "Control Panel > Add/Remove Programs > Windows Setup > Communications" This wil provide a much higher data rate than using modems. You will need to setup shares on the machinesand will therefore need to install File/Print sharing.

by buckle

I forgot to say that you will need a D25 male to male cable connect the printer ports

by lo

You can also use a null modem off a serail port. Cable is about $15. Should have software on the system (Hypertrem) or freeware, Kermit, Xmodem, Ymodem, Zmodem, etc. or commercial, ProCom, etc. that will do if you have both systems in the same room.

If you want access to your PC from a remove site, a real modem connection is what you are after (above answers should work). If you want really fast connection, put a net card in both and just connect. That is about 10mb/sec for a 'cheap' card, 100mb/sec for a 'good' one.

I think with a 'real' netowrk you can use the Briefcase function to sync to the PC (at least with Win 2k).

If you are just transfering files, you can get Zip drive/disks or similar (100mb) for reasonable $ these days.

This discussion is closed to new replies.