Discussion Locked

How to find the i.p address

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
how to find the I.P. address of a stand alone machine having nt server 4.0 as it's operating system and which does not have a network interface card (nic) and the server service of the nt server is working along with all the services like ras.

12 replies

by hippo

From a command prompt run ipconfig /all
Should list all the IP properties
~Tony

by hemant_goswami

dear friend,
Use the ipconfig command to get ipaddress of your machine. This command will given rom commandprompt

by hemant_goswami

dear friend,
Use the ipconfig command to get ipaddress of your machine. This command will given rom commandprompt.

by hemant_goswami

dear friend,
If you ave chosen static IP address at the time of network setup and want to see
IP address of your machine then you have to rightclick on "Network Neighborhood"
icon then select properties->protocols->TCP/IP , at this moment you can see your machine's
IP Address.
And if you had select DHCP then you have to use "IPCONFIG" command which can be given from either "Run"
or "CommandPrompt" , the options of "IPCONFIG" are :

/? :Display this help message.
/all:Display full configuration information.
/release : Release the IP address for the specified adapter.
/renew : Renew the IP address for the specified adapter.

This discussion is closed to new replies.