17 replies
by mr_t_wright Accepted solution
by ron k. Accepted solution
by bhkolts Accepted solution
I have run into, not only do you need to edit the registry, but replace userinit.exe in the windows\system32 folder. Use a live CD like UBCD4WIN or boot to the recover console with the XP CD. I don't remember were exactly but some where close to i386\ folder is where you will find the original userinit.exe.
So far after repairing and scanning I find no virus, but at this point I think an antivirus has found a virus in userinit.exe and removed or quarantined it. I think userinit.exe missing is what causes the endless logon-logoff loop.
Hope this helps,
Barry
by mr_t_wright Accepted solution
by bhkolts Accepted solution
I had this on two machines, the first one I reloaded Windows on top of itself (repair), the second one I was a little more knowledgeable. I replaced userinit.exe and rebooted OK. When I checked the registry it was OK also. I found userinit.exe in clamwin's quarantine folder, so clamwin had removed userinit.exe. I'm not sure if it was a false positive or not. The first machine was using AVG free, but I didn't think to check if AVG had removed userinit.exe at the time. So I'm still not sure the exact cause, but at least we can fix it.
Barry
by jgirizarry Accepted solution
Boot from an Ultimate Boot CD and open a registry editor, do the following:
This has worked for me in the past.
OPEN THE KEY "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\Userinit " AND CHANGE THE USERINIT VALUE FROM
"C:\WINDOWS\SYSTEM32\WINLOGON32.EXE TO C:\WINDOWS\SYSTEM32\USERINIT.EXE
by mr_t_wright Accepted solution
by jgirizarry Accepted solution
by mr_t_wright Accepted solution
by older mycroft Accepted solution
In other words, you've got no chance of hitting anything!
As [b]Ron K.[/b] has already asked ~ what are you attempting to achieve here??
You cannot construct a technically proficient thread if the intercourse follows the pattern of:
[i]"If you are trying to do what I was trying..."
"Yes, that sounds like what I was thinking..."[/i]
[b]Could someone PLEASE stand up and be counted? WTF are you trying to do??!![/b]
by mr_t_wright Accepted solution
I want to be able to fix the none login issue.
Normally when you type in the password and hit enter the machine loads up, however this one says loading personal setting and then says logging off instead of loading up.
I am working of the assumption that a virus was the cause if this issue and I am trying to fix that issue. And many have said that I should start in the registry to make sure { Shell = Explorer.exe and userinit = C:\WINDOWS\system32\userinit.exe they do. So I was told that I should try and replace the userinit.exe file and I did so. Yet when i log in it still logs me back off. Its no logging all the way in to my desktop
by sue t Accepted solution
by mr_t_wright Accepted solution
by apdumas Accepted solution
by ron k. Accepted solution
HKLM\System\CurrentControlSet\Control\SessionManager\BootExecute (Type Reg_Multi_SZ) (Data)
See what the Data column has in it. Make accurate notes of any Value data, remove it, leaving the Data value empty, and try the drive again.
If it's not that put the Value data back to the way it was and post back here.
While you're trying things make sure that the Data for HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell is set to explorer.exe
If you've already tried these I apologize for repeating the advice.
by mr_t_wright Accepted solution
by ron k. Accepted solution
mr_t_wright... I must remember that name.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending