Discussion Locked

How to get DVD player to play sound?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just put a new DVD player in my computer, and I have no sound when I play DVDs. CDs play fine, and the picture for the DVDs is great, I just don't get any sound when I play the DVDs. What might I have overlooked?

6 replies

by dafe2

Should be a cable comming off the DVD and connecting to the audio (in) on your sound card.

by house

Software configuration?

mono; 2 channel; 6 channel; etc. Inconsistencies in selecting the appropriate audio setup will give you these kinds of issues.

by derekc

I used to be able to play DVDs and get sound. When I installed a new motherboard with on-board sound, I also formatted my drive and installed XP with SP2 built in, so I don't know whether it's the new card or SP2.
I went out and bought the cable that runs from the DVD drive to the sound card, but that didn't fix it. I've also made sure that it was set to 2 speaker mode instead of 5.1.
I'm going to reinstall Windows anyway, so I'm going to go back to SP1.

Derek

by jasminder2

I didn't install the "Power DVD" disk that came with the new DVD drive. I didn't know if it was necessary, or just software to enhance the sound of a drive that has sound. I know now that it is necessary!

This discussion is closed to new replies.