Discussion Locked

How to get rid of 100VG newtwork

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Thank you in advance for assisting me with my question.

We currently have an old NT Domain running on 100VG network. We need to eliminate 100VG so that this network can be inline with the rest of our Fast Ethernet. The NT domain needs to be replaced with AD 2003 (which is not a problem). My main concern is how do I get rid of 100VG (100vg supported switches and hubs included) while not loosing NT connectivity?

1 reply

by nicknielsen

But here goes.

If you have an interface between the 100VG and Ethernet segments, you can probably cut machines over one at a time, replacing the 100VG NIC with a FE NIC and configuring the PC for the AD connection.

If you want all PCs to come off the NT domain and go on to AD as a group, the number of machines involved will determine how much time it will take. You will need to replace all 100VG NICs with Fast Ethernet NICs, replace all 100VG hubs with Fast Ethernet switches, and configure each PC to connect to AD. If your infrastructure is already Cat 5, you should be done.

If your 100VG infrastructure isn't already Cat 5, you will also have to replace that. Changing your network protocol is [u]never[/u] easy.

This discussion is closed to new replies.