Discussion Locked

How to migrate from IP classC to ClassB

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am going to reach very quickly the total available number of IP addresses (class C) in some subnets in my company.
I think I should migrate from a class C to a class B IP network in order to get additional free addresses. I am running NT4 serversand routers to connect other remote locations. How could I smoothly migrate servers and clients(dhcp driven) ?

Thanks a lot for any advice.

Jose

5 replies

by some guy in seattle

Probably the "least disruptive" way to do this is to list all your statically assigned devices (routers, servers, switches, etc.) and estimate how long it will take to make the IP address changes on them. Then add another ten minutes per DHCP server/scope. Then plan to do all this on a Friday or Saturday night when the least amount of users are present. It may be useful to start lowering your lease time to an 4- or 5-hourly range so the user machines will respond more quickly when the scopesare changed to get a new IP address. Send out a network notice explaining what will be occurring to all the users with DHCP addresses, so they will know to reboot if they can't access the network when they next log on (most likely Monday). And then stand by for the usual amount of calls by users that resist all efforts to participate in the changeover.

Hope that helps,

by ntoz

If your reaching a max on your address class, I would start thinking about segmenting my network to reduce traffic. Even in a switched enviroment your sharing a broadcast domain. If this were the cource of action, you would then have an entire new range of addresses for the hosts you split into your new subnet.

This discussion is closed to new replies.