Discussion Locked

How to use the Windows NT "AT" command t

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How to use the Windows NT "AT" command to backup some files from a network drive to a Jaz drive? Need to run the backup in certain times. Is there an easier way other then the AT commands?

9 replies

by Member 33509877

NT backup only works with tape devices. If you have the software and drivers for the Jaz drive, you should be able install this and use it to schedule backups. Failing that, contact iomega.com

by estebandelatorre

Frist you must ensure that your Jaz drive is able to to do backup's
Start NTbackup and try to backup some files to your jazz drive.
Go to control Panel services and SET start automatically the Scheduler
Create a file named myjob.cmd file with notepad and describe your backup job:
ntbackup backup c: /D "My Backup Files" /B /L "c:\backup.log"

This performs the following:
?Backs up all files on the C drive.
?Replaces any files currently on the tape.
?Labels the backup set "My Backup Files."
?Backs up the local registry.
?Logs all backup information to C:\Backup.log.

Using the AT command, schedule the command file (MyJob.cmd) to run when desired. The following AT command schedules MyJob.cmd to execute at 11:00 P.M. every Monday, Wednesday, and Friday:
Open a Dos box and type:
AT 23:00 /every:M,W,F MYJOB.CMD
Remember to insert a Tape!!!!

To execute the same job but at 10:00 too just type another AT command:
AT 10:00 /every:M,W,F MYJOB.CMD

Good Luck
EDT@bancobgn.com

by brianaaa12

If MS Backup won't support the Jaz drive, create a standard batch file such as:
cd c:\my_files
xcopy *.* E:\ /s /y

then, at a command prompt enter the AT command to run the batch file created above.

Brian

This discussion is closed to new replies.