Discussion Locked

HP 4000 Printer Settings

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have numerous HP4000 printers here that keep losing their printer settings such as paper type and tray settings. This is common when external documents are printed as often the Go button has to be pressed to force documents to print from another tray. For example, if I was to print to the manual tray, set to hold ltrhead paper, I would have to press the GO button but it would only print to tray 2 (colour paper) or tray 3 (plain).

Does anybody have any suggestions as to what causes this or how to permenently fix the setting on the printers, so we are not continually having to reset them.

Thanks

6 replies

by juanita marquez

If external documents are the problem, it may be that whatever individual printer settings that are in the document's source file were saved by the document creator and are overriding the printer defaults. For example, if whoever sent the file had printed it on legal paper in tray 2 in a landscape format and requested 100 copies, that setting would be "remembered" in the saved file when your user tried to print it without changing the print settings to their own printer. This is particularly common with Excel documents. If you are referring to the MS Office Suite, you might have your users check the printer settings that have been saved with the documents in question before printing them. The way to access these settings is while in the application program, go to File - Print...- then click on the Properties box next to the selected printer window, and check or change the various printer properties to make sure they are what you want to happen in YOUR printer. Once the user savesthe file with this new configuration, the file will "remember" it for next time and it will not have to be changed. Some of the other suite programs don't do this remembering so you may have to get your users to check the file print settings each time prior to printing a freshly-opened file; some programs will "take", you just have to see which behave in what way. The best option is to have the user check the settings every time they first open any file, and for the length of time they use that file the settings will stay the same. Upon reopen of the file, they should check the settings again prior to printing.

Hope this fixes your problem.

by jwilczyn

I experienced same problems ? my advice ? try to change the printer driver.
Instead of using PCL 5e/6 ? try to use the PostScript driver.
I hope it should fix your problem.

by jwilczyn

2nd ? work around ? use these printers but with installed drivers for HP LJ4 or 4Plus. Users won?t be able to make any changes to the printer configuration. It works fine ? you can specify optional trays, etc. only resolution ? 600dpi ? you can?t gohigher.

This discussion is closed to new replies.