Discussion Locked

HP 4500 PRINTS BLANK COPIES

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I HAVE AN HP 4500 COLOR PRINTER WHICH PRINTS BLANK COPIES,

10 replies

by bfilmfan

Does it only print blank copies?

Or is it printing a seperator page between print jobs?

Depending on your OS, there are various ways to turn off separator pages.

by rngara

its not a OS problem because even a self printer test page comes out blank, and its not the toner coz it works on another printer

by ghimpe--

Sounds like the printer heads are clogged. You can try to clean them or replace them.

by hal 9000

Then start looking at the drum/fusser or whatever HP calls it as that is what picks up the toner and deposits it onto the paper. If it isn't holding a Static Charge it can not pickup the toner and if the control circuitry isn't working properly the Drum isn't getting the charge to pickup the toner.

Col

by wlbowers

Could be several things.

Is the paper warm when it comes out of the printer.

You could have drum, transfer, or fuser.

Try doing a maintance cleaning on the unit.

http://tinyurl.com/8wfvb

Pay particular attention to any sensors mentioned.

Good Luck

Lee

This discussion is closed to new replies.