Discussion Locked

HP Deskjet 712c printer with Windows ME

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I loaded Windows ME on my Compaq Presario(4640) few months ago. Since then I have not been able to print to my HP Deskjet 712c printer. I can print to it from an NT computer just fine and did not have any problems when I had Win 95 loaded on my Compaq. I have tried everything I could from reinstalling the printer driver to playing with the BIOS settings. Nothing seems to work. Can anyone help me???

10 replies

by parbo

Do you have the lastest driver for ME? I know from experience that some older drivers dont work with ME

by rarora

As far as I know I do. I downloaded the one from HP's website which should be current, although it dates back to 1998.

by jolly roger

Unfortunately, the Compaq website makes no mention of Windows ME as a viable OS for this model. However, have you tried playing with the printer port settings (standard, EPP, ECP). Are you CERTAIN you have an IEEE-1284-compliant printer cable? Sorry, that's all I can think of!

by michtif-maker

Hi there. I have the same printer and I know they can be tempermental little cusses! I just looked at my original cdrom that came with it and it's dated 1998 v10.3. Did you use the original software when you installed your printer, or did you just plug it in and count on windows to configure it? I ask because hp printers and scanners don't seem to react well that way (at least not mine don't). I just had to reformat and reinstall my win98 system (BIG PAIN!) and actually had to backtrack twice before getting the sequence right as far as when to install from the cd and when to connect the printer and scanner. Once I did it in the wrong order, I had to go back and remove all evidence in the registry before trying to install it again.
Anyway, I think you probably need to load first. If you don't have the cdrom, I'd be happy to share with you. Otherwise, the HP Customer Care info is www.hp.com/go/support or 1-208-344-4131 They were pretty helpful to me once i think I recall. Good luck! ~Michtif

by addison99

I would recommend you down load the latest drivers from HP's web site.

Do you get any errors when you try to print?

Ive had simlar problems with A HP scanner but this was giveing me a blue screen when scanning. I rectified this by downloadingthe ME drivers.

Good Luck

This discussion is closed to new replies.