Discussion Locked

HP LaserJet 1100 not printing WinXP Home

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Windows XP Home edition is having trouble printing to a HP LaserJet 1100, in order to print the paper must be lift and droped back into the paper slot, the printer was changed to another identical model to try to see if it was the printer, the problem is identical. HP talks about the port configuration but for other models.

5 replies

by lizzy

What kind of trouble is it having? That model printer had a "free" kit offered for it by HP that would fix paper feed problems that they have. Problems included grabbing too much paper, jamming, ripping the paper, locking up the printer in windowsunless you shut down and restarted the printer and PC after clearing a paper jam. HP called it a "Tool." It's not much more that some cardboard that inserts a "separation pad." It worked on the dozen or so that I have here. Go to

www.hp.com/support/separation_pad

for more info. Best wishes.

by lizzy

Of course, it could be a driver issue. Check for updated drivers at hp. If none for XP, I would go with the NT2000 drivers...

by aiavive

the printers work well on other computers, we tried two more printers, the same model and we have the same result, they won't print (even a test page), unless you pick the paper up and release it again to fall into the paper slot, I tried changing the port, changing the cord, changing the power outlet, and I tried the printer on other computers and they print correctly except on that new computer.

by lizzy

Have you checked your BIOS settings on this PC? If you need assistance getting into the BIOS, please contact me by clicking on my name\link. Settings usually are:
EPP (usually recommended)
ECP/EPP (ECP+EPP)
ECP mode

I would reboot the PC at least twice with each setting being tested to see if any of these improve performance. Also, make sure that your printer cable is bi-directional or at least IEEE-1284 compliant. Hope this helps.

This discussion is closed to new replies.